495367
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
2nd rinse
After a short time, the
Ì symbol appears again. x :„‹ min
appears in the display.
1. Thoroughly rinse out the cleaning sponge.
2. Remove the remaining water from the evaporator dish using
the cleaning sponge.
3. Close the appliance door and press the button.
The appliance starts rinsing.
Once descaling is complete,
‹‹:‹‹ and Ì appear in the
display.
4. Press the ~ main switch to finish descaling and switch off
the appliance.
Removing the remaining water
Remove the remaining water from the evaporator dish using the
cleaning sponge. Wipe out the cooking compartment using the
cleaning sponge and then dry with a soft cloth.
Cancelling the descaling
Note: After cancelling the descaling, you must rinse the
appliance twice. Other applications are disabled until the
second rinsing operation is complete.
Press and hold the
button to cancel the descaling process.
To ensure that no descaling solution remains in the appliance,
it must be rinsed twice after a cancellation.
The
Î symbol appears.
Now proceed as described in the "1st rinse" section.
Troubleshooting
Malfunctions often have simple explanations. Please read the
following instructions before calling the after-sales service.
Repairs may only be carried out by fully trained after-sales
service technicians. Incorrect repairs to your appliance may
present considerable risks for the user.
: Risk of electric shock!
Work on the appliance electronics may only be performed by
a specialist.
Always disconnect the appliance from the power supply
when work is carried out on the electronics. Switch off the
circuit breaker or remove the fuse from your household fuse
box.
Problem Possible cause Notes/remedy
The appliance does not work The plug is not plugged in. Connect the appliance to the electricity
supply
Power cut Check whether other kitchen appliances
are working
Fuse defective Check in the fuse box to make sure that
the fuse for the appliance is OK
Faulty operation Switch the appliance off using the fuse in
the fuse box. Wait approximately
10 seconds and then switch it back on
The appliance cannot be started The appliance door is not fully closed Close the appliance door.
Appliance does not start.
x and :‹‹
min appear in the display
Descaling has been cancelled Rinse the appliance twice
(see section: Cancelling descaling)
‹‹:‹‹ lights up in the display
Power cut Reset the time of day (see section: Setting
the clock)
The appliance is not in operation.
x
appears in the display, and a cooking time
The button was not pressed after set-
ting
Press the button to start, or press the
~ main switch to turn off the appliance
The appliance is not in operation. The time
of day is not shown in the display.
The clock display is switched off Switch on the clock display (see section:
Changing the time of day; switching the
clock display on and off)
The
Î (Fill water tank) indicator appears,
even though the water tank is full
The water tank has not been inserted
properly
Slide in the water tank until it engages.
The detection system is not working Descale the appliance (see section: Des-
caling) and check which water hardness
has been set (see section: Setting the
water hardness range)
It is difficult to engage the water tank Rubber seal on the water tank valve Lightly grease the rubber seal with lubri-
cant (order no. 311 168)
The evaporator dish has boiled empty
even though the water tank is full.
The water tank has not been inserted
properly
Slide in the water tank until it engages
The feed line is blocked Descale the appliance (see section: Des-
caling).
Check whether the water hardness range
is set correctly
The evaporator dish is overflowing The evaporator dish was not emptied after
the last cooking operation
Use the enclosed cleaning sponge to
empty the evaporator dish after every
cooking operation
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff C44R20N3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff C44R20N3 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neff C44R20N3

Neff C44R20N3 User Manual - German - 64 pages

Neff C44R20N3 User Manual - Dutch - 24 pages

Neff C44R20N3 User Manual - French, Italian - 64 pages

Neff C44R20N3 User Manual - Portuguese, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info