495367
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
If you want to cancel all the changes, you can restore the
factory settings.
1. Press the ~ main switch to turn on the appliance.
2. Press and hold the o button for 3 seconds to go to the basic
settings menu.
™‚ appears in the display.
3. Press the o button repeatedly until the current basic setting
for the corresponding sub menu is displayed.
4. Turn the rotary selector to change the basic setting.
5. Press and hold the o button for 3 seconds to exit the basic
settings menu.
The change is saved.
You can change the following basic settings:
Care and cleaning
In this section, you will find information on
the care and cleaning of your appliance
Descaling
: Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
harsh or abrasive cleaning agents
oven cleaners
corrosive or aggressive cleaners, or those containing
chlorine
cleaning agents with a high alcohol content
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled.
Salts are very corrosive and can cause rust. Remove remains
of acidic sauces (ketchup, mustard) or salted food from the
cooking compartment immediately after cooling.
Do not use hard scouring pads or cleaning sponges.
Basic setting menu
Submenu Basic setting Setting
symbol
Audible signal when
button is pressed
Audible signal off
™‚
Audible signal on
™‚
Audible signal when
operation ends
Short audible signal (30 sec-
onds)
™ƒ
Medium audible signal (2
minutes)
™ƒ ƒ
Long audible signal (10 min-
utes)
™ƒ
Auto start: not neces-
sary to restart after
opening the appli-
ance door
Auto start off
™„
Auto start on
™„
Water hardness
range for the descal-
ing indicator
softened
™…
soft (I)
™…
medium (II)
™… ƒ
hard (III)
™…
very hard (IV)
™…
Audible signal for
end of heating up
Auto start off
™†
Auto start on
™†
Adjust the cooking
results in the pro-
grammes individually
Cooked normally
™‡
Less thoroughly cooked
™‡ ƒ
More thoroughly cooked
™‡
Restore the appli-
ance to the factory
setting*
Do not restore
™ˆ
Restore
™ˆ
* Factory setting:
all changes to the basic settings are deleted
automatic calibration is carried out again
The appliance is restored to the factory setting if you select
™ˆ and then press and hold the o button for 4 seconds.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff C44R20N3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff C44R20N3 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neff C44R20N3

Neff C44R20N3 User Manual - German - 64 pages

Neff C44R20N3 User Manual - Dutch - 24 pages

Neff C44R20N3 User Manual - French, Italian - 64 pages

Neff C44R20N3 User Manual - Portuguese, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info