539929
15
Zoom out
Zoom in
Previous page
1/84
Next page
English.5
English
Display Adjustment & Mounting
Raise and Lower Display Screen
The display may be raised or lowered in either portrait or landscape
mode. To raise or lower the screen, place hands on each side of the
display and lift or lower to the desired height.
NOTE: Handle with care when raising or lowering the display
screen and avoid pinching your fingers.
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid
knocking the screen on the stand or pinching your fingers. To rotate the
screen, place hands on each side of the display screen and turn clockwise
from landscape to portrait or counterclockwise from portrait to landscape.
To rotate the orientation of the OSD menu between landscape and portrait,
refer to the “OSD” section, “OSD Rotation” function.
Tilt and Swivel
Grasp the left and right sides of the display screen with your hands and
adjust the tilt and/or swivel as desired.
NOTE: Handle with care when tilting the screen.
Remove Stand for Mounting
This stand can be removed in order to mount the display using
an alternate, VESA approved, mounting method.
1. Disconnect all cables.
2. Place hands on each side of the display and lift up to the
highest position.
Rotate the screen 90° counter clockwise to the landscape position.
3. In the landscape position, place the display face down on a nonabrasive surface.
Place the screen on at least a 36mm platform so that the stand is parallel with the surface
(Figure S.1).
4. Remove the 4 screws connecting the display to the stand (Figure S.2).
NOTE: Reverse the process to reattach stand.
Handle with care when removing monitor stand.
Flexible Arm Installation
Use a flexible arm that is strong enough to support the weight of the display (approx 7.3kg).
Use the 4 screws that were removed from the stand to attach the flexible arm to the display
(Figure S.3).
NOTE: Use the original screws (4 pcs) when mounting to avoid damage to the display and
stand. To fulfill the safety requirements the display must be mounted to an arm
which guaranties the necessary stability under consideration of the weight of the
display. The display can only be used with an approved arm (e.g. GS mark).
Figure S.2
Figure S.3
Figure S.1
36mm
01_MD205MG-1_INSTALL_EN.P65 7/5/08, 10:09 AM5
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec MD205MG-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec MD205MG-1 in the language / languages: English, German, French as an attachment in your email.

The manual is 13,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info