170484
212
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
212
www.nec-computers.com
Problems with Disk Array Configuration
Refer to the manual supplied with the RAID controller.
Problems with Master Control Menu
The master control menu fails to appear:
Is your system Windows NT 4.0 or later, or Windows 95 or later?
- The CD-ROM Autorun feature is supported by Windows NT 4.0 and Windows
95. The older versions do not automatically start from the CD-ROM.
Is Shift pressed?
- Setting the CD-ROM with Shift pressed down cancels the Autorun feature.
Is the system in the proper state?
- The menu may not appear depending on the system registry setting or the tim-
ing to set the CD-ROM. In such a case, start the Explorer and run
\MC\1ST.EXE in the CD-ROM.
Problems with Configuration Diskette Creator
The bit map of the Configuration Diskette Creator window is not displayed
correctly during setting of setup information. (When the Trekking command is
used)
- Ιf the specified number of colors is fewer than 256 in the display setting, the bit
map is not displayed correctly, but the setup information can be displayed cor-
rectly.
The Point to Point tunneling protocol cannot be set.
- The protocol is not supported at present. After installation, set the protocol
through Control Panel. In this case, rebooting is not necessary.
The details of a network adapter cannot be set.
- Configuration Diskette Creator is unable to set the details of network adapters.
Start Windows 2000/2003, and set the details through Control Panel.
More than one network board is connected during setting of setup information, but
TCP/IP cannot be set for each network.
- Perform the installation procedure during DHCP setting. To create a temporary
IP configuration, perform the installation procedure during DHCP setting, and
then set TCP/IP again through Control Panel.
Problems with Disk Array Configuration
Refer to the manual that comes with the disk array controller for any trouble occurring
with the disk array in this system.
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info