170484
211
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
211
www.nec-computers.com
- Is the [Partition Size] specified by the value larger than the real area? If you
want to create one partition in all area of the hard disk (excluding the mainte-
nance area) to install the OS, specify [All Area].
Windows 2000 started with different display resolution from the specified value.
- If the specified display resolution can not be used, the system will use the near-
est value or the default value of the driver.
Entered the incorrect Product ID/CD key.
- Even if you entered the incorrect Product ID/CD key, Express Setup will start.
However, the setup will stop and asks you to re-enter the correct value. Also in
this case, input request will occur when rebooting after GUI setup completed
during Express Setup. If these 2 inputs are done correctly, there is no problem
on Windows 2000 setup.
Unable to specify the details of Network adapter.
- In Express Setup, you can not specify the details of Network adapter. Specify
them from Control Panel after starting Windows 2000.
Windows 2000 is started with Network adapter that has not been specified during
Express Setup
- Windows 2000 will install the recognized Network adapter specified as default
value. If you want to modify the specification, it can be done from Control
Panel after starting Windows 2000. Also, the Network adapter that has been
specified during Express Setup but that is not connected will not be setup,
though the protocol will only be installed.
Connected more than two Network adapter and specified different protocol for
each adapter, but all the protocols are specified on either adapter.
- It's a design. Each adapter is specified so that all the installed protocols can be
used. The value that can not be specified during Express Setup will all be speci-
fied by default value.
When more than two Network adapter are specified, the detailed specification of
TCP/IP protocol are all set to use DHCP.
- When more than two Network adapter are specified, the detailed specification
of the protocol may all be set by default value. Re-specify the details from Con-
trol Panel.
Not more than two Network adapter is connected, but the detailed specification of
the protocol are all set by default.(e.g. Specified IP Address on TCP/IP, but DHCP
is specified)
- Are you specifying more than two protocols? In this case, the situation will be
the same as connecting more than two Network adapter, so the detailed specifi-
cation of the protocol are all set by default. Re-specify the details from Control
Panel after starting the OS.
211


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info