170484
206
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
206
www.nec-computers.com
Is the hard disk properly configured?
Fail to access the (internal or external) SCSI devices:
Is the SCSI device applicable to the server?
- Operation of any SCSI device that is not authorized by NEC is not guaranteed.
Is the cable connection changed?
Are SCSI devices properly configured?
- When the server has external SCSI devices connected, devices settings, includ-
ing SCSI ID and terminator, are required. Refer to the manual that comes with
the SCSI device for details.
Is cable length exceeded?
- Refer to the manual that comes with the SCSI device for details.
Are the optional SCSI controllers properly configured?
- When the server has an optional SCSI controller installed and SCSI devices
connected to it, use the POST Setup utility that comes with the optional SCSI
controller for proper configuration. See the manual that comes with the optional
SCSI controller for details.
The server is not found on the network:
Is the LAN cable connected?
- Make sure to connect the LAN cable to the network port on the rear of the
server. Also make sure that the LAN cable to use conforms with the network
interface standard.
Is the BIOS configuration correct?
- The internal LAN controller may be disabled with the BIOS SETUP utility of
the server. Check the setting with the BIOS SETUP utility.
Ηave the protocol and service already configured?
- Ιnstall the distinctive network driver for the server. Make sure that the protocol,
such as TCP/IP, and services are properly specified.
Ιs the transfer speed correct?
- Open the network property dialog box in control panel to specify the "Link
Speed & Duplex" value the same as the value specified for HUB.
Wake on LAN does not start from standby state.
Ιs Hub set to Auto-Negotiation? Or, Is the client set to Auto-Negotiation/optimum
speed?
206


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info