170484
173
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
173
www.nec-computers.com
The following table shows the normal settings for the Adaptec SCSI Utility and
provides a place for you to record any changes you make to these settings.
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.
SCSI Disk Utilities
This utility scans the SCSI bus for SCSI devices, and reports a description of each
device. Run this utility before configuring SCSI devices.
To enter the utility, select SCSI Disk Utilities on the Options menu.
The SCSI ID scan begins displaying the message as shown below.
Table 14: SCSISelect Utility Setup Configurations
OPTION RECOMMENDED SETTING OR
DISPLAY ONLY
YOUR
CONFIGURATION
SCSI Bus Interface Definitions
SCSI Controller ID 7
SCSI Controller Parity Enabled
SCSI Controller Termination Enabled
Additional Options
Boot Device Configuration Press ENTER for menu
Master SCSI Controller 29320ALP slot 01 03:01:00
Boot SCSI Controller 29320ALP slot 01 03:01:00
SCSI Device Configuration Press ENTER for menu
Sync Transfer Rate (MB/Sec) 320
Packetized Yes
QAS Yes
Initiate Wide Negotiation Yes
Enable Disconnection Yes
Send Start Unit Command Yes
BIOS Multiple LUN Support
No
1
Include in BIOS Scan
Yes
1
Advanced Configuration Press ENTER for menu.
Reset SCSI Bus at IC
Initialization
Enabled
Display <Ctrl-A> Messages
During BIOS Initialization
Enabled
Extended Int13 Translation for
DOS
Drives >1 GByte
Enabled
POST Display Mode Verbose
SCSI Controller Int13 Support
Enabled
1
Domain Validation
Enabled
1
Support Removable Disks
Under Int13 as Fixed Disks
Disabled
1, 2
BIOS Support for Bootable
CDROM
Enabled
1
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info