170484

Nec express5800 tm800 nl Manual

172
Zoom out
Zoom in
Previous page
1/266
Next page
User Guide
172
www.nec-computers.com
SCSISelect Utility
The SCSISelect Utility detects and configures the SCSI controller located on the
system board or an optional SCSI controller board installed in your system. This utility
may be started with a simple key operation while POST is in progress and requires no
specific start-up disk.
The SCSISelect Utility is used mainly to set the transfer rate of connected SCSI device.
Use the SCSISelect Utility to:
■ Change default values
■ Check and/or change SCSI device settings that may conflict with those of other
devices in the server.
Running the SCSISelect Utility
You access the SCSISelect Utility when you turn on or reboot your system.
To run the utility, perform the following procedure:
1. Power-on or reboot the system.
2. When the “Press Ctrl-A to run SCSI Utility...”message appears, press Ctrl+A.
The SCSI utility starts. When the Adaptec SCSI Utility detects more than one
host adapters, it displays a selection menu listing the slot number of each
adapter. Select the adapter you wish to configure.
3. The following screen is displayed:
4. If you wish to format a disk, verify disk media, or display a list of devices and
their SCSI IDs, select SCSI Disk Utilities.
If you wish to configure the adapter or a device, select Configure/View
Controller Settings.
Adaptec SCSI Utility Configuration Settings
The following keys are active for all Adaptec SCSI Utility screens:
Table 12: SCSISelect Utility Selection Menu
Menu Description
Configure/View Controller Settings Configure host adapter and device settings.
SCSI Disk Utilities The utility scans the SCSI bus for SCSI devices,
reports a description of each device. Run these utilities
before configuring SCSI devices.
Table 13: Active Keys
Key Action
Arrows Up and down arrows move from one parameter to another within a
screen.
ENTER Displays options for a configurable parameter. Selects an option.
ESC Moves back to previous screen or parameter or EXIT if at the Main
menu.
F5 Switches between color and monochrome.
F6 Resets to host adapter defaults.
… 172 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec express5800 tm800 nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec express5800 tm800 nl in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info