512549
10
Zoom out
Zoom in
Previous page
1/19
Next page
10
NAVMAN
MULTI 3100 Installation and Operation Manual
5 Depth, keel offset, too deep alarm, too shallow alarm
Depth and keel offset
The displayed depth is the distance from the transducer
on the boat to the bottom of the water, plus or minus an
offset which is called the keel offset:
A positive keel offset displays depth as
measured from a point above the transducer.
For example, if you set the offset as the
distance from the transducer to the surface, it
Deep
alarm
value
Alarm
is on
Shallow
alarm
value
Alarm
is off
will display the depth from the surface to the
bottom of the water.
A negative keel offset displays depth as
measured from a point below the transducer.
For example, if you set the negative offset as
the distance from the transducer to the bottom
of the keel, it will display the depth from the
bottom of the keel to the bottom of the water.
5-1 Set depth units
The units can be METERS, FEET or FATH:
Press until DEPTH is displayed, then hold
until the units change; if necessary, hold
until the units change again.
5-2 Set too deep alarm
The too deep alarm sounds if the alarm is turned on
and the depth becomes equal to or more than the
too deep alarm depth. To mute the alarm, press .
To set the too deep alarm:
1 Hold
for two seconds to display the Too
Deep Alarm screen:
2 To change the alarm depth, press
or .
3 To turn the alarm on or off, press
.
4 Press
.
5-3 Set too shallow alarm
The too shallow alarm sounds if the alarm is turned
on and the depth becomes equal to or less than the
too shallow alarm depth. To mute the alarm, press
. To set the too shallow alarm:
1 At the Too Deep Alarm screen, hold
for two
seconds to display the Too Shallow Alarm screen:
2 To change the alarm depth, press or .
3 To turn the alarm on or off, press .
4 Press .
5-4 Anchor watch
To set an anchor watch, set the too shallow alarm to
slightly less than the current depth and set the too
deep alarm to slightly more than the current depth.
Allow for tide changes.
5-5 Set keel offset
Keel offset is described above. The range is ± 2.9 m
(± 9.6 ft, ± 1.6 fathoms):
1 Press
+ several times until the Keel
Offset screen is displayed:
2 Press or to change the keel offset.
3 Press .
Keel
offset
(negative)
Positive value
Keel offset
Negative value
Transducer
Depth of transducer
Water surface
Keel offset
Note: The boat illustrated uses a through hull transducer
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Multi 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Multi 3100 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Multi 3100

Navman Multi 3100 User Manual - German - 18 pages

Navman Multi 3100 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info