512540

Navman Multi 100 Manual

11
Zoom out
Zoom in
Previous page
1/13
Next page
14 NAVMAN M100 User Manual
Calibration Procedures
Note:
If the speed and depth readings flash, this
indicates that the calibration values have
been lost. To correct this, check the depth
units, alarm values, keel offset, speed units
and the speed calibration.
Keel Offset
The NAVMAN M100 will normally display the
depth of water below the face of the transducer.
You may introduce a negative keel offset equal
to the distance from the transducer to the bottom
of the keel to display the depth of the water
below the keel. A positive offset equal to the
distance from the waterline to the transducer
can be used to display the total depth from the
water surface to the bottom. This is often called
a waterline offset.
Follow the Secondary Functions chart to reach
Keel Offset mode.
Use the
or key to set the required value.
When the required value is displayed press the
key. The value will be stored in memory.
Note:
When the depth units are changed the
keel offset value will automatically be
recalculated and displayed in the new units.
Transducer Setting
Three values of transducer setting can be
selected (1 to 3). A setting of 3 provides the
maximum immunity to turbulence, surface clutter
and transducer ringing at the expense of shallow
water performance under 4 feet. A setting of 1
enables the M100 to work in water as shallow
as 1.8 feet at an increased susceptibility to
turbulence. At a setting of 2, the M100 will properly
display depths down to 2.9 feet. The default
setting is 2.
To enter the transducer setting into memory and
exit, press the
key.
Calibrate Temperature Display
To adjust the temperature displayed.
Follow the Secondary Functions chart to reach
Temperature Calibration mode.
To increase reading press the
112mm
(4.4”)
4.5mm
(1.75”)
30mm
(1.2”)
112mm
(4.4”)
24mm
(1”)
56mm
(2.2”)
35mm
(1.4”)
key.
To decrease reading press the
key.
To enter the calibration setting into memory and
exit, press the
key.
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Multi 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Multi 100 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info