470004
13
Zoom out
Zoom in
Previous page
1/36
Next page
3-7 Setup > Comms
Use this feature when the FISH 4500/4600 is
connected to other Navman instruments through
NavBus or any compatible NMEA instrument.
Press MENU once or more until the Setup menu
is displayed, then select Comms:
NMEA Out
NMEA is generally used with third party instru-
ments. Select to transmit NMEA sentences (see
Appendix A - Specifications).
NMEA data
Use this to specify which NMEA sentences will
be transmitted (see Appendix A - Specifications
and section 5-7 Data display, for information
about how to display NMEA data).
NavBus
NavBus is the preferred method for connecting
the FISH 4500/4600 to other Navman instru-
ments. Select if the instruments are connected
using NavBus.
NavBus Group
Use this when a group of Navman instruments
are connected together using NavBus, to specify
a group of instruments for backlighting, if required.
Then, if the backlight setting on one instrument
in the group is adjusted, the other instruments
change automatically. Otherwise, select 0.
3-8 Setup > Calibrate
Press MENU once or more until the Setup menu
is displayed, then select Calibrate:
The fuel options can
be calibrated only
when the optional sin-
gle or twin engine kit
is installed on petrol/
gasoline engines.
Speed
Calibration may be required because different hull
shapes have different flow characteristics.
Obtain an accurate measurement of the boat’s
speed from a GPS receiver; or by following another
boat travelling at a known speed; or by making a
timed run over a known distance.
Note: for accurate calibration:
The speed from a GPS receiver should be
greater than 5 knots.
The speed from another paddlewheel trans-
ducer should be between 5 and 20 knots.
Best results are achieved in calm conditions
where there is minimal current (best at high or low
tide).
Use the cursor keys to display the speed readout
box, then increase or decrease the readout to
match the independent speed value.
Speed Filter
Increase this setting to stabilise an erratic speed
reading. Decrease to improve reading respon-
siveness. The speed filter can be set from 0 to
30 seconds.
Temperature
The factory settings should be sufficiently accurate
for normal usage. To calibrate the temperature
readout, first measure the water temperature with a
thermometer known to be accurate.
Use the cursor keys
to display the temperature
readout box,
then increase or decrease the value
to match the measured temperature. The tempera-
ture can be set from 32° to 99.9°F (0° to 37.7°C)
with a resolution of 0.1° unit.
To change the units between °F (Fahrenheit) or °C
(Celsius), see section 3-6 Setup > Units.
Temp filter
Increase this setting to stabilise an erratic tem-
perature reading. Decrease to improve reading
responsiveness. The temperature filter can be
set from 0 to 30 seconds.
FISH 4500/4600 Installation and Operation Manual 13
NAVMAN
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4500 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4500

Navman FISH 4500 User Manual - German - 39 pages

Navman FISH 4500 User Manual - Dutch - 40 pages

Navman FISH 4500 User Manual - French - 38 pages

Navman FISH 4500 User Manual - Italian - 38 pages

Navman FISH 4500 User Manual - Portuguese - 38 pages

Navman FISH 4500 User Manual - Swedish - 37 pages

Navman FISH 4500 User Manual - Spanish - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info