470004
11
Zoom out
Zoom in
Previous page
1/36
Next page
Set remaining
Before doing a partial refill of the tank or remov-
ing fuel manually from the tank (for example, by
siphoning it off):
1. Note the Remaining reading on the
Fuel display.
2. Note how much fuel is added or removed.
3. Calculate how much fuel is now in the tank.
4. Select Set remaining and update
the reading.
It is essential to do this whenever some fuel
is added or removed. Otherwise, the read-
ing on the Fuel display (see section 5-6 Fuel
Display) and the Low Fuel Alarm (see section
3-5 Setup > Alarms) are meaningless.
Clear used
Select Clear used to set Used (the amount
of fuel used) to zero. Do this to start measuring the
amount of fuel used over a certain time or distance.
When asked Are you sure? select Yes.
Tank size
Enter the capacity of the fuel tank.
Num engines
Set the number of engines to 0, 1 or 2. If 0 is
selected the fuel features are turned off.
Calibrate
See section 3-8 Setup > Calibrate, for information
about calibrating the fuel transducer(s).
Flow filter
Most engines do not draw fuel from the tank at a
steady rate. To give a stable fuel flow reading, the
fishfinder calculates the flow value(s) by taking
several measurements and averaging them. Use
the Flow filter to set the period over which the fuel
flow is averaged.
For twin engine installations, the fuel flow for each
engine must be adjusted separately.
The Flow filter can be set from 0 to 30 seconds. Use
the lowest value which gives a stable flow. Usually a
value of 5 to 10 seconds will give a satisfactory result
for two-stroke carburettor engines. Fuel injected or
four-stroke engines may require a larger value.
This setting affects the Fuel flow and Fuel
economy reading on the Fuel display (see section
5-6 Fuel display) but it does not affect the Fuel
used reading.
Speed Source
Select speed input from water speed transducer or
external GPS source (an external GPS source must
be connected to the Fishfinder via NavBus or NMEA
comms – see section 3-7 Setup > Comms.)
3-4 Setup > Logs
Press MENU one or more times until the Setup
menu is displayed, then select Logs:
The values can be changed independently of
each other. These log values are saved when
the unit is turned off.
Reset trip dist
This resets the trip distance to zero.
Reset total dist
This option resets the total distance to zero.
Reset engine hours
Use this option to reset the engine hours to
zero. This can be useful after an engine service
or to count the engine hours between service
intervals.
FISH 4500/4600 Installation and Operation Manual 11
NAVMAN
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4500 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4500

Navman FISH 4500 User Manual - German - 39 pages

Navman FISH 4500 User Manual - Dutch - 40 pages

Navman FISH 4500 User Manual - French - 38 pages

Navman FISH 4500 User Manual - Italian - 38 pages

Navman FISH 4500 User Manual - Portuguese - 38 pages

Navman FISH 4500 User Manual - Swedish - 37 pages

Navman FISH 4500 User Manual - Spanish - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info