470011
24
Zoom out
Zoom in
Previous page
1/30
Next page
25
Fish 4430/4431 Installation and Operation Manual
Optional transducers
· Through hull Speed/Temperature
transducer.
· Through hull Depth transducer.
· In hull Depth transducer.
Other options and accessories
· Replacement paddle wheel.
· Adapter cable for through hull transducer.
· Carry bag.
5-2 Options and Accessories
There are two mounting arrangements:
· Flush mounting requires a solid panel
with access behind for wiring and
mounting screws.
· Bracket mounting requires a panel for
mounting the bracket. The bracket can
be rotated and tilted.
Select a position where the display head will be:
· At least 4” (100 mm) away from the
compass.
· At least 12” (300 mm) away from any
radio transmitter.
· At least 4’ (1.2 m) away from any
antenna.
· Easy to read by the helmsman and crew
while underway.
· Protected from physical damage during
rough sea passages.
· Easy to access the 12 volt power source.
· Convenient to route the transducer
cables.
Bracket mounting
1. Fix the mounting bracket onto the boat
using the three stainless steel screws. Do
not overtighten as the bracket may not
rotate.
5-3 Mounting the FISH 4430/4431 Display Unit
2. Push the display unit onto the mounting
bracket and tighten it firmly using the knob
on the mounting bracket.
3. Attach the cables.
Removing the FISH 4430/4431
The FISH 4430/4431 can be removed after each
use for protection against the environment or
security reasons.
When removing the FISH 4430/4431 ensure
that the plugs left in the boat are not exposed
to the elements. Push the attached dust covers
over the exposed ends of the plugs. Keep the
display unit in a dry clean place such as the
optional NAVMAN carry bag.
Flush mounting
1. Cut a hole in the bulkhead for the
display unit using the flush mount
template.
2. Drill four holes for the mounting studs
using the flush mount template.
3. Screw the four studs into the brass
inserts in the back of the display unit.
4. Sit the display unit in place and fit the
washers and nuts to the studs.
· Transducer extension cable.
· Sun cover.
Depth Repeater
Repeater for Depth, Speed, Water Temperature,
Battery Voltage (see section 5-5).
Please consult your NAVMAN dealer for more
information.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4431 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4431

Navman FISH 4431 Usermanual and installation guide - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info