470011
8
Zoom out
Zoom in
Previous page
1/30
Next page
9
Fish 4430/4431 Installation and Operation Manual
SONAR screen (see section 3-5)
Displays the strength and depth of the echoes
returned from each ultrasonic pulse. The depth
range is displayed in the lower right corner.
This screen is a powerful aid, ideal for showing
the bottom hardness and the fish species.
This screen can also be used to adjust the
display shading on the HISTORY and ZOOM
screens.
NAVIGATE screen (see section 3-6)
Prominently displays the water depth as a
digital readout. The corresponding bottom
trace is also shown. These two complimentary
features are particularly useful for
understanding depth trends when travelling
at speed.
It also displays the boat speed and the enabled
alarms.
DATA screen (see section 3-7)
The DATA screen displays the water
temperature and water temperature history
over the last 40 minutes. It also displays the
boat battery voltage, log, engine-hours
counter, boat speed, water depth and enabled
alarms.
SETUP menu (see section 4)
Use this option to customise the FISH
4430/4431 to suit the boat and individual
preferences.
RANGE menu (see section 3-8)
Use this option to select either Auto or Manual
Range and to change the selected depth range.
Alarms can be enabled to automatically detect
certain conditions, such as the water being
too shallow. The trigger settings for the alarms
can be defined to suit the boat and individual
preferences.
The fishfinder has six alarms, TOO SHALLOW,
TOO DEEP, FISH ALARM, TEMP VALUE, TEMP
RATE and LOW BATTERY.
The alarm symbols and beeper cycles for all of
the alarms are shown in section 4-1. The FISH
ALARM is three short beeps, the TOO SHALLOW
ALARM is a rapid continuous beep while all
others are a slower continuous beep.
When an alarm condition is met, then:
· The beeper sounds.
· The ALARMS menu is displayed on the
screen with the activated alarm(s) flashing.
Press any key to acknowledge the alarm, stop
the beeping and remove the ALARMS menu.
This does not disable the alarm. The symbol
will continue to flash until the alarm condition
is no longer present.
Alarms automatically re-enable
The TOO SHALLOW, TOO DEEP and LOW
BATTERY alarms automatically re-enable when
the value moves outside the alarm trigger
setting.
The TEMP VALUE alarm automatically
re-enables when the temperature is more
than 0.45°F (0.25°C) above or below the alarm
trigger setting.
The TEMP RATE alarm automatically re-enables
when the rate of temperature change falls
below the trigger setting by more than 0.F
(0.1°C) per minute.
Enabling Alarms and Changing Trigger
Values
See section 4-1 for information about enabling
alarms and changing the trigger values.
3-1 Alarms
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4431 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4431

Navman FISH 4431 Usermanual and installation guide - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info