470014
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
NAVMAN
FISH 4200 Installation and Operation Manual
Use this menu at installation time, to select the
language and to enter the keel offset value, the number
of engines and the fuel tank size. The INSTALL menu
can also be used to calibrate the water temperature
and boat speed.
Select MAIN MENU - SETUP - INSTALL to display the
menu.
4-8 INSTALL menu
Water surface
Depth of transducer
Enter positive values to display depth as measured from a point above the transducer (e.g. water surface).
Enter negative values to display depth as measured from a point below the transducer (e.g. keel).
Negative value
Transducer
Note: Boat illustrated uses a through hull transducer
Positive value
Use Keel Offset either when the
transducer is located below the
water surface but a display of total
water depth is required, or when
depth of water below the boat’s
keel is required.
Press
or
to highlight
an option.
LANGUAGE
The following languages
are available: English,
French, German,
Spanish, Italian, Dutch,
Swedish, Portuguese
and Finnish.
Press
or
to highlight
the selected language,
then press
to save
and exit.
KEEL OFFSET
Keel offset is the distance between the location of
the depth transducer and the point the displayed
depth is measured from.
Enter a keel offset value when the transducer is
located below the water surface but a display of
total water depth is required, or when the depth of
water below the boat's keel is required.
Press
or
to select KEEL OFFSET, then press
to display the keel offset box.
Negative values display the depth as measured
from a point below the transducer (e.g. keel).
Positive values display the depth as measured from
a point above the transducer (e.g. water surface).
Press
or
to increase or decrease the value.
CALIBRATION
See section 4-9 for a description of the calibration
menu options.
NUM. ENGINES
Use this to specify the number of engines on your boat.
Press to select 0, 1, or 2. Note: selecting 0 will
remove the fuel options from the menus and turn off
all the fuel features.
TANK SIZE
Use this to specify the capacity of the fuel tank (this
is displayed in the units selected through the
SETUP - UNITS menu). Press
or
to increase
or decrease the value as required.
It is recommended that the fuel tank capacity is
measured by draining the fuel tank and then filling
it to capacity. After filling, note the reading from the
fuel dispensers gauge. Note: Be aware of air
pockets, especially in underfloor tanks.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman FISH 4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4200 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info