Manual Navman FISH 4150 (page 14 of 25) (English)

470016

Zoom out

Zoom in

1/25

NAVMAN FISH 4100 Installation and Operation Manual

Use the SETUP menu to customize the NAVMAN

fishfinder to suit the boat and individual

preferences.

On a FISH 4100 use the SETUP menu to:

· Specify the trigger settings for the alarms (4-1).

· Choose the depth units (4-2).

· Turn the key beep on or off (4-3).

· Choose the fish

symbol (4-4).

· Adjust the

display contrast

(4-5).

· Select language

and setup keel

offset (4-7).

Select MAIN MENU -

SETUP to display the

FISH 4100 SETUP

Menu. Press

to select an option:

4 SETUP menu

On a FISH 4150 use the SETUP menu to:

· Specify the trigger settings for the alarms (4-1).

· Choose the units for depth, temperature and speed

(4-2).

· Turn the key beep on or off (4-3).

· Choose the fish symbol (4-4).

· Calibrate the log, temperature and speed (4-6, 4-8).

· Select the Trip Log or

the Total Log (4-6).

· Zero the Trip Log or

zero all logs (4-6).

· Adjust the display

contrast(4-5).

· Select language, setup

keel offset and calibrate

speed and temperature

sensors (4-7, 4-8).

Select MAIN MENU - SETUP

to display the FISH 4150

SETUP Menu. Press

to select an option:

Select MAIN MENU - SETUP - ALARMS to display the

available alarms. Press

or to select an option.

Alarms can be enabled to

automatically detect certain

conditions, such as the

water being too shallow.

Trigger settings can be

defined to suit the boat and

individual preferences. The

FISH 4100 ALARMS menu

is shown:

The FISH 4150 has two

extra alarms, TEMP

VALUE and TEMP RATE.

The beeper cycle is different for some alarms. All of

the alarm symbols and beeper cycles on the FISH

4100 are shown:

4-1 ALARMS menu

When an alarm condition is met, then:

· The beeper sounds.

· The ALARMS menu is displayed on the screen

with the activated alarm symbol(s) flashing.

Press any key to acknowledge the alarm, stop the

beeping and remove the ALARMS menu. This does

not disable the alarm. The symbol will continue to

flash until the alarm condition is no longer present.

Note: The FISH ALARM gives only three short beeps.

Alarms automatically re-enable

The TOO SHALLOW, TOO DEEP and LOW

BATTERY alarms automatically re-enable when the

value moves outside the alarm trigger setting.

The TEMP VALUE alarm automatically re-enables

when the temperature is more than 0.45°F (0.25°C)

above or below the alarm trigger setting.

The TEMP RATE alarm automatically re-enables

when the rate of temperature change falls below the

trigger setting by more than 0.2°F (0.1°C) per minute.

Symbol Alarm Beeper Alarm condition is

Name Cycle met when:

Too

sec the depth is less than

Shallow the alarm trigger value

Too

sec the depth is greater

Deep than the alarm trigger

value

Fish 3 short an echo matches the

Alarm beeps profile of a fish

Low

sec the battery voltage is

Battery less than the alarm

trigger value

The alarm symbols and beeper cycles for the two

extra alarms on the FISH 4150 are shown:

Symbol Alarm Beeper Alarm condition is

Name Cycle met when:

Temp

sec the temperature equals

Value the alarm trigger value

Temp

sec the rate of change of

Rate temperature equals the

alarm trigger value

sono in possesso di un navman fish 4150 e da un po di tempo non riesco piu a leggere perche non visualizza gli sritti quindi non riesco ad utilizarlo . Mi sapete dire cosa sara successo
Submitted on 31-12-2020 at 23:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Navman FISH 4150 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman FISH 4150

Navman FISH 4150 Usermanual and installation guide - German - 27 pages

Navman FISH 4150 Usermanual and installation guide - Dutch - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Navman FISH 4150 Manual

Product: