736330

Nautilus U628 Ergometer Manual

30
Zoom out
Zoom in
Previous page
1/40
Next page
30
1. After the POWER HIIT program is selected, the Console displays SET TARGET WATTS - HIGH. The High watts value
refers to the highest power output goal during the work period. Use the Increase(c) or Decrease(d) buttons to adjust
the HIGH target watts value for the work period, and push OK.
The default is 90w. The ma[imum value is 300w. The value is displayed in 5w increments.
Note: Holding down the button speeds up the selection scrolling of the display.
2. The Low watts value refers to the lowest power output goal during the rest period. Use the Increase(c) or Decrease(d)
buttons to set the LOW target watts value for the rest period.
The default is 40w. The minimum value is 30w. The value is displayed in 5w increments.
3. Push OK to start the workout. The target watts value for the interval will be displayed throughout the interval period.
The watts value of the current power output will show on the lower display.
To adjust the target watts value during the workout, use the Increase(c) or Decrease(d) buttons or the Resistance
Increase or Decrease buttons.
Note: The Resistance Level Quick buttons are disabled during the workout.
CONSTANT POWER (Time or Distance goal)
The CONSTANT POWER program lets the user set a target watts value for a set length of time or distance.
1. After the CONSTANT POWER program is selected, the Console displays SELECT GOAL TYPE.
2. Use the Increase(c) or Decrease(d) buttons to select the type of Goal (Time or Distance), and push OK.
3. Use the Increase(c) or Decrease(d) buttons to adjust the goal value, and push OK.
The default time is 30 minutes. The default distance is 10.0 miles.
Note: Holding down the button speeds up the selection scrolling of the display.
4. Use the Increase(c) or Decrease(d) buttons to adjust the Target Watts value.
The default is 120w. The ma[imum value is 300w. The minimum value is 30w. The value is displayed in 5w increments.
Note: Holding down the button speeds up the selection scrolling of the display.
5. Push OK to begin the goal-oriented workout. The WATTS TARGET is displayed at the top of the screen. The GOAL
value will count down as the value for percent completed increases.
To adjust the target watts value during the workout, use the Increase(c) or Decrease(d) buttons or the Resistance
Increase or Decrease buttons.
If the watts output does not match the target watts value (/- 10), the WATTS TARGET value will Àash. If necessary,
push the Increase(c) or Decrease(d) buttons or Resistance Increase or Decrease buttons to adjust the WATTS
TARGET value.
Changing a Workout Program During a Workout
The Console allows a diႇerent Workout Program to be started from an active workout.
1. From an active workout, push PROGRAMS.
2. Push the Increase(c) or Decrease(d) buttons to select the desired workout program, and push OK.
3. Push the Increase(c) or Decrease(d) buttons to select the Goal type, and push OK.
4. Push the Increase(c) or Decrease(d) buttons to set the value for the workout.
5. Push OK to stop the active workout and start the new workout.
The previous workout values are saved to the User Pro¿le.
Pausing or Stopping
The Console will go into Pause Mode if the user stops pedaling and pushes PAUSE/END during a workout, or there is no
RPM signal for 5 seconds (user not pedaling). The Console will cycle through a series of messages that change every 4
seconds:
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

nautilus-u628-ergometer

Reset search

  • Where do I find the serial number to the U628 Nautilus Bike!!!

    Mr Challis

    Thank-you Submitted on 14-1-2022 at 16:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nautilus U628 Ergometer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nautilus U628 Ergometer in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nautilus U628 Ergometer

Nautilus U628 Ergometer User Manual - German - 42 pages

Nautilus U628 Ergometer User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info