Manual Nautilus U618 (page 34 of 38) (English)

671457

Zoom out

Zoom in

1/38

TROUBLESHOOTING

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Check electrical (wall)

outlet

Make sure unit is plugged into a functioning wall outlet.

Check connection on

console

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display IfConsoleonlyhaspartialdisplayandallconnectionsarene,

replace the Console.

If the above steps do not resolve the problem, contact Cus-

tomer Care for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

Sensor grip Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands Sensorsmayhavedifcultywithdriedoutorcallousedhands.

A conductive electrode cream (heart rate cream) can help

make better conduct. These are available on the web or at

medicalorsomelargertnessstores.

Handlebar If tests reveal no other issues, Handlebars should be replaced.

Unit operates but

Telemetric HR not

displayed

Chest Strap (optional) Strap should be “POLAR®” compatible and uncoded. Make

sure strap is directly against skin and contact area is wet.

Chest Strap Batteries If strap has replaceable batteries, install new batteries.

CheckUserProle SelecttheEditUserProleoptionfortheUserProle.Goto

the WIRELESS HR setting and make sure that the current

value is set to ON.

Interference Trymovingunitawayfromsourcesofinterference(TV,Micro-

wave, etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, replace Console.

Unit operates but

Telemetric HR displayed

incorrectly

Interference Make sure that the HR receiver is not blocked by a personal

electronic device in the left side of the media tray.

No speed/RPM reading,

Console displays “Please

Pedal” error code

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

Check Speed Sensor

(requires shroud removal)

Speed sensor should be aligned with magnet and connected to

data cable. Realign sensor if necessary. Replace if there is any

damage to the sensor or the connecting wire.

when I am pedalling the digital display doesn't recognize that I am pedalling and tells me to start pedalling...then after five seconds the unit goes into Pause mode, the display also doesn't show that I have gone any distance in that no mileage is registered... Submitted on 19-1-2022 at 19:25
Reply Report abuse
when I am medaling the display doesn't recognize that I am medaling and tells me to start medaling, also the display for mikes or kilometres doesn't register any distance even though I am medaling...I am also unable to access any of the programs.. Submitted on 19-1-2022 at 19:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nautilus U618 in the language / languages: English as an attachment in your email.

The manual is 10,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nautilus U618 Manual

Product: