707126
198
Zoom out
Zoom in
Previous page
1/212
Next page
17.6. Gater
The Gater rhythmically mutes parts of the audio at adjustable rates. The Master Clock controls the
rate and the moment in time of muting. A hissing noise can be added to the Gater for emphasizing
the rhythmical pattern.
In order for the Gater to match the beats in the music, it is absolutely necessary that your tracks
have well aligned Beatgrids and that the Master Clock follows the track tempo in Auto Mode.
Single Mode
NOISE (Noise Level): Controls the amount of hissing noise added to the Gate. Min: No added
hissing, Max: Much added hissing.
SHAPE: Controls the shape of the Gate. Min—Center: 1 % Hold, 0 % Decay—50 % Hold, 0 %
Decay Center—Max: 50 % Hold, 0 % Decay—0 % Hold, 100 % Decay.
RATE: Controls the rate of the Gater. The 5 available values are expressed in fractions of bars,
and are equally distributed over the range of the knob. Min—Max: Off—1/4—1/8—1/16—1/32.
MTE (Mute): Fully mutes the music and passes only the added hissing noise.
Activating MTE in combination with no added Noise Level results in no audio output.
STT (Stutter): Activates 3/16 gating time for producing a stuttering effect.
Activating STT disables the action of the RATE knob.
Group Mode (1-Knob Control)
The knob controls the rate of the Gater and behaves like the RATE knob in Single mode.
17.7. Beatmasher 2
The Beatmasher 2 is a buffer-based effect that captures a short loop from the current audio materi-
al and mashes it up.
Single Mode
ON: When turning on the effect it samples one bar or audio based on the tempo of the master
clock. To sample a new piece of audio, turn the effect off and then back on.
The effect has to be started in off mode and then turned on to sample the current audio.
GATE: Combined controller for different ways of mixing and gating the sampled material:
In full left position bypasses the effect. From full left to centre mixes in progressively bigger
chunks of the buffered audio.
In centre position just plays the buffered audio. From center to full right position cuts out
progressively bigger chunks of audio like a gater.
ROT (Rotate): Shifts the sampled audio relative to its original position in steps of 1/8 notes. At
minimum Length, the Rotate knob continuously rotates the sample.
LEN (Length): Controls the length of the audio played back from the buffer.
Effect Reference
190
198


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Traktor Pro 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Traktor Pro 3 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info