707126

Native Traktor Pro 3 Manual

119
Zoom out
Zoom in
Previous page
1/212
Next page
2. Create a new generic MIDI device.
3. Assign the Out-Port to the device you want to send the MIDI Clock signal to.
4. Open the External Sync page in the Preferences.
5. Tick Enable MIDI Clock.
The additional MIDI Clock functions are now displayed in the Master Control panel.
6. To start sending a MIDI Clock signal, click the Start/Stop button. Clicking it again stops send-
ing.
When MIDI Clock is enabled, the Start/Stop button is lit blue. The Tempo Display shows the
tempo of the MIDI Clock signal in BPM.
By clicking the SYNC button, TRAKTOR triggers a MIDI Clock Stop Message immediately fol-
lowed by a MIDI Clock Start Message to re-sync the external hard- or software.
It may be required to adjust the offset between TRAKTOR and the receiving hard- or software.
For syncing external hardware with the MIDI Clock, the Master Clock has to be set
as Master Tempo Source.
12.2.3. Syncing two Instances of TRAKTOR
These are the steps to sync two versions of TRAKTOR running on different computers:
1. Connect the two computers via MIDI in order to transmit the MIDI Clock signals.
2. Decide which of the two computers should be the Clock Master and click the MASTER but-
ton in the Master Control panel.
3. On the other computer click the AUTO button in the Master Control panel.
4. To sync both computers, press the TICK button in the Master Control panel.
5. Once the two ticks are audible, press the SYNC button in the Master Control panel on the
sending computer in order to reset the receiving computer.
6. Now start tweaking the MIDI Clock Sending Offset until the two Ticks are in perfect sync by
clicking the Offset button.
7. You can then turn off the Ticks.
12.3. Recording Your Mix with the AUDIO RECORDER
In order to record your mix with the AUDIO RECORDER you at first need to make some adjust-
ments in the Preferences and also to the AUDIO RECORDER to record audio from TRAKTOR's
Master Output.
Adjusting AUDIO RECORDER Preferences
Before you start recording you have to adjust the settings on the Mix Recorder page in the Prefer-
ences to define the audio source and the file settings:
1. Open the Mix Recorder page in the Preferences.
Advanced Operation of TRAKTOR
111
… 119 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Traktor Pro 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Traktor Pro 3 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info