Manual Naim NAT05 XS (page 7 of 34) (English, German, French, Italian)

707498

Zoom out

Zoom in

1/34

NARCOM Remote Handset

6 NARCOM 4 Remote Handset

The NARCOM 4 remote handset is is a multi-functional remote control handset designed

to be used with Naim CD players, integrated amplifiers, preamplifiers, preset tuners and

subwoofers.

To fit batteries, remove the battery cover and insert the batteries into the body taking care

with their orientation. Replace the battery cover.

System Component keys

Numeric keys (soft)

CD Transport (global)

Volume and mute keys (global)

Left (

) and right (

) keys (soft)

Prog key and Mon key (soft)

Balance keys (global)

Scan and Mode keys (global)

Disp key (soft)

6.1 Using NARCOM 4 with the NAT05 XS

Operation of the NARCOM 4 handset is based around

three types of keys: System Component Keys, Global Keys

and Soft Keys.

6.1.1 System Component Keys

System Component Keys keys switch the operation of

the Soft Keys into modes appropriate to each system

component: CD player, tuner (tun) preamplifier, etc.

Global Keys operate specific component functions

regardless of the System Component Key setting and are

available at all times.

6.1.2 Gobal Keys

Global Keys operate as follows:

vol (5 & 6): Adjusts the preamplifier volume and the

volume control position.

mute: Reduces the preamplifier volume to zero. A

second press restores the volume.

bal (3 & 4): Adust channel balance on appropriately

equipped products.

CD Transport: Control CD transport and track selection.

scan: Switches the tuner to scan mode and starts

a scan from the current frequency upwards.

When a station is found the scan will stop.

Pressing the scan key will resume the scan.

mode: Switches the tuner between frequency,

scan and preset modes.

6.1.3 Soft Keys

In tuner mode the Soft Keys are used to store station

presets. Soft keys operate as follows:

The prog key enables specific FM station frequencies to be

assigned to preset memories. To assign a station to a preset

either tune manually by inputting the station frequency

directly from the numeric keypad or by using the left

(3), right (4) or scan keys. Stations found by the tuner

scanning the FM band can also be saved as presets.

When a station is tuned press and hold the prog key. The

tuner is now in preset program mode: the preset indicator

will flash and the display will show -- on the left hand side.

Enter the desired preset number from the numeric keypad

or by using the left

(

) and

right

(

) keys

. On its right

hand side the display will show — or P if the preset number

6.2 NARCOM 4 Keys

is already in use. If the preset number is already in use a

different preset number can be entered at this point. Exit

from program mode and save the new or overwritten

preset by pressing and holding the prog key. To exit from

preset program mode without saving (or overwriting) a

preset, select 0 0 on the numeric keypad.

To erase a preset number, select the preset and press and

hold the disp key.

The disp key can also be used to switch the tuner display

on and off. When the display is switched off it will illuminate

temporarily when a front panel button or handset key is

pressed.

Note: The info and select keys are

unused.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAT05 XS in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Naim NAT05 XS Manual

Product: