707511
16
Zoom out
Zoom in
Previous page
1/20
Next page
5.0 NAC S1 AND NAP S1 OPERATION
5.3 BALANCE CONTROL
NAC S1 balance can be adjusted using the handset <bal or bal> keys. Balance adjustment will
temporarily replace volume on the NAC S1 volume display.
5.4 ILLUMINATION CONTROL
NAC S1 and NAP S1 illumination has normal and vivid operational modes and can also be adjusted
for brightness. Illumination control covers button illumination, volume control illumination,
input display illumination and logo illumination.
NOTE. If your preamplifier and power amplifiers are connected using CAN bus, illumination
adjustments will automatically apply to all.
Illumination modes can be alternately selected by pressing the top panel disp button or the handset
disp key.
In vivid mode, all illumination will remain permanently lit while the units are operational. Vivid
mode illumination brightness can be adjusted using the handset disp- and disp+ keys.
In normal illumination mode only logo illumination remains lit permanently. Button illumination,
volume control illumination and input display illumination will fade up on control operations and
fade out again three seconds following control operations. Normal mode illumination brightness
can be adjusted using the handset disp- and disp+ keys.
NOTE. Normal illumination mode fade-out following switch-on is ten seconds.
5.5 STATEMENT REMOTE HANDSET
Statement preamplifiers are supplied with a remote control handset that both duplicates all the
Statement top panel controls and provides transport control for many Nim source and streaming
components. The remote handset, its buttons and their functions are illustrated in Diagram 5.6.
Four AAA batteries must be installed in the remote handset before it can be used. To install the
batteries remove the bottom end cap by unscrewing the two allen bolts using the 2.5mm allen key
supplied. Insert the batteries into the remote handset body taking care with their polarity.
Replace the end cap and lightly tighten the allen bolts.
5.6 REMOTE HANDSET FUNCTIONS
Press to select standby mode
or to wake units from standby.
Press to select the next input.
Press to mute audio or to
restore audio.
Press to increase volume.
Press to decrease volume.
Press to adjust balance.
Not used with NAC S1 or NAP S1.
Use for transport control on Nim
source components.
Press to reduce illumination
brightness, to change
illumination mode and to
increase illumination brightness.
Press to select
the previous input.
Not used with NAC S1
or NAP S1. Use for transport
control on Nim
source components.
30 31
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP S1 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP S1

Naim NAP S1 User Manual - German - 38 pages

Naim NAP S1 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info