707511
14
Zoom out
Zoom in
Previous page
1/20
Next page
4.2 AUDIO INPUT GAIN ADJUSTMENT
The input gain for each of the five NAC S1 inputs can be individually adjusted to compensate for
different source output levels. An adjustment range of plus or minus 7dB in 1dB steps is available.
Any of the inputs can also be switched to “unity gain” mode where NAC S1 volume control is
disabled. Unity gain enables the NAC S1 to integrate with audio-visual systems where a multi-
channel home theatre processor takes over system volume control.
To adjust the input gain proceed as follows:
Using the remote handset or the top panel input buttons select the preamplifier input to
be adjusted.
Press and hold both the connection panel down and up buttons until the gain indicator flashes.
If the specific NAC S1 input is in its default gain state the 0dB indicator will be flashing.
With the indicator flashing use the down or up button to increase or decrease the gain.
Press the select button to save the new input gain setting and leave the input gain adjustment
routine. The input gain will now be set at the desired level.
To switch an input to unity gain mode proceed as follows:
WARNING. Unity gain must be used with great care as any signal connected
to a unity gain input will be passed to the power amplifier at maximum output level.
Using the remote handset or the top panel input buttons select the preamplifier input to be
switched to unity gain. Ensure that any source connected to the input is switched off.
Press and hold both the connection panel down and up buttons until the gain indicator flashes.
If the specific NAC S1 input is in its default state the 0dB indicator will be flashing.
With the indicator flashing use the up button to increase the gain to +7dB.
Press and hold the up button until the +7dB indicator extinguishes and the unity indicator
flashes.
Press the select button to save the unity gain setting and leave the unity gain selection routine.
Unity gain will now be engaged on the selected input.
4.0 NAC S1 PREAMPLIFIER SETUP
26 27
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP S1 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP S1

Naim NAP S1 User Manual - German - 38 pages

Naim NAP S1 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info