707509
19
Zoom out
Zoom in
Previous page
1/44
Next page
E17
SUPERNAIT Integrated Amplifier
19 SUPERNAIT Introduction and Installation
The Supernait should be installed on a dedicated equipment stand intended for the
purpose. Do not stand it directly on top of another item of equipment. Care should
be taken to ensure that it is level. The amplifier should be installed in its final location
before connecting cables or switching on. Ensure that the volume is turned down before
switching on.
A variety of power supply upgrade, alternative preamplifier and alternative or additional
power amplifier options are possible for the Supernait. Diagrams illustrating the connection
of some of these are shown in Section 20.
The following Section 19 paragraphs describe installation features and functions specific
to the Supernait. Operational features common to all preamplifiers and integrated
amplifiers are described in Section 28.
19.1 Source Input Selection and Assignment
The input selection buttons arranged along the upper
bank select the source signal to be routed to the power
amplifier and the loudspeakers. The six buttons are labelled
cd, tuner, tape, av, aux1 and aux2.
Each input button may be assigned to analogue inputs
(via DIN, RCA Phono or 3.5mm jack sockets), or to digital
inputs via RCA Phono coaxial, “Toslink” or “mini-toslink”
optical sockets. The default settings and the assignment
setup procedure are detailed in Sections 19.2 and 19.3
respectively.
19.1.1 Analogue Inputs
The first four selection buttons (cd, tuner, tape and av) can
each be assigned to both a DIN input socket and a pair of
RCA Phono input sockets on the rear panel. The DIN and
Phono sockets for each input are internally wired in parallel
and should not be connected simultaneously.
The aux1 and aux2 selection buttons can each be
assigned to a pair of RCA Phono input sockets and a DIN
input socket on the rear panel respectively.
Note: The aux2 DIN input socket carries a power supply
output voltage appropriate for a Naim phono preamplifier.
19.1.2 Digital Inputs
The Supernait additionally provides four S/PDIF digital input
sockets - 2 RCA Phono coaxial and 2 “Toslink” optical - on
the rear panel. Any input selection button can be assigned
to one of these sockets.
Note: The digital inputs support stereo PCM audio only. If
the digital signal contains anything other than stereo PCM
audio (Dolby or DTS encoded programme material for
example) all outputs will be muted.
19.1.3 Front Panel Combined Input
An auxiliary front panel input socket is also provided. This
socket is a 3.5mm analogue “jack” input combined with
a digital “mini-Toslink” optical socket. The analogue input
is wired internally in parallel with the rear panel aux1 input
and the two must not be connected simultaneously.
The front panel input (analogue or digital) is automatically
selected (and the aux1 selection button automatically
assigned to it), whenever a plug is inserted in the socket.
Note: The Supernait is able to differentiate a digital source
from an analogue one at the front panel input if the digital
source is working when the plug is inserted.
Input selection will revert to that previously selected when
the front panel input plug is removed.
19.2 Default Input Selection Button and Input Socket Assignment
Input Selection Input Socket Input Socket
Button Assignment Type
cd Analogue Input 1 DIN/RCA Phono
tuner
Analogue Input 2 DIN/RCA Phono
tape
Digital Input 1 RCA Phono Coax
av
Analogue Input 4 DIN/RCA Phono
aux1
Digital Input 2 “Toslink” Optical
(See Note)
aux2
Analogue Input 6 DIN (with Naim phono stage power supply)
Note: Any plug inserted into the front panel socket will automatically provoke selection of
this input (digital or analogue) and will automatically assign it to the aux1 selection button.
Operational features
common to all
preamplifiers and
integrated amplifiers
are described in
Section 28
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAP 300 DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAP 300 DR in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAP 300 DR

Naim NAP 300 DR User Manual - English - 16 pages

Naim NAP 300 DR User Manual - German - 44 pages

Naim NAP 300 DR User Manual - French - 44 pages

Naim NAP 300 DR User Manual - Italian - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info