707500
9
Zoom out
Zoom in
Previous page
1/22
Next page
E7
SUPERNAIT 2
7. Operation and Programmable Functions
The SUPERNAIT 2 incorporates some programmable functions and operational nuances. These are described in the
following paragraphs.
7.1 Automatic Input Switching
With Automatic Input Switching engaged the appropriate
source input will be selected as soon as any handset
function for that (Naim) source component is operated. For
example, if the tuner input is selected and the cd play key is
pressed on the handset, the SUPERNAIT 2 will automatically
switch to the cd input. Automatic Input Switching can be
programmed to operate on any combination of the cd,
tuner, hdd and av input buttons.
To enable Automatic Input Switching, rst switch the
SUPERNAIT 2 into program mode by pressing and holding
the handset prog key (with the handset in preamplier
mode). The front panel mute button will illuminate if
automatic switching is already enabled. If it is not enabled it
can be switched on by pressing the mute button.
With automatic switching enabled, pressing the mute
button again will reveal the inputs selected for auto
switching by their indicators illuminating for a short time.
Repeated operation of the mute button will sequentially
select through each possible combination of cd, tuner, hdd
and av inputs and auto switching disabled (all indicators
o). When the desired inputs selected for auto switching are
indicated, stop pressing the button.
Automatic Input Switching only becomes operational on exit
from program mode by pressing and holding the handset
prog key.
Note: The SUPERNAIT 2 will leave program mode
automatically if no control commands are received for ve
minutes.
Note: In a few cases some further equipment
conguration may be required for auto switching to
operate correctly. Please contact your retailer or local
distributor for advice.
7.2 Handset Volume and Balance Control
The remote handset volume and balance keys provide some
alternative control characteristics. A short press and release
of a key will adjust by a preset “nudge, while pressing
and holding the key will result in three seconds of slow
adjustment followed by continual fast adjustment.
7.3 Mute
Mute silences the outputs and can be selected or
deselected by pressing the front panel mute button or
remote handset mute key.
7.4 Display
The SUPERNAIT 2 front panel button illumination can be
switched o by pressing the remote handset (in preamplier
mode) disp function. Any subsequent handset or front panel
operation will temporarily restore the display. A second
operation of the disp function will restore the display.
7.5 Switch-on
After switch-on the SUPERNAIT 2 will remain muted for 20
seconds while control systems and circuits stabilise.
7.6 Remote Control
The NARCOM 5 remote handset supplied with the
SUPERNAIT 2 duplicates all conguration and control
functions. See Section 15 for more information.
7.7 Defaults
To restore all SUPERNAIT 2 programmable settings to the
factory defaults press and hold the remote handset disp key
while the unit is in program mode. The SUPERNAIT 2 will
exit from program mode following this operation.
7.8 Fault Conditions
The SUPERNAIT 2 will indicate fault conditions by ashing
front panel button buttons. The following table lists the fault
indications.
Fault Flashing Button
Link Plug or Power Supply mute
Excess Temperature cd
Excess Current tuner
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim NAIT 5SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim NAIT 5SI in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim NAIT 5SI

Naim NAIT 5SI User Manual - German - 22 pages

Naim NAIT 5SI User Manual - Dutch - 22 pages

Naim NAIT 5SI User Manual - French - 22 pages

Naim NAIT 5SI User Manual - Italian - 22 pages

Naim NAIT 5SI User Manual - Polish - 22 pages

Naim NAIT 5SI User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info