602923

NAD VISO TWO Manual

28
Zoom out
Zoom in
Previous page
1/34
Next page
SPECIFICATIONS
• Controls up to 8 devices.
• 44 function keys.
• Learns up to 352 commands.
• Records up to 44 macros with a maximum of 64 commands each.
• Congurable punch-through.
• Key illumination with programmable timeout.
• Upgradable.
• Contains pre-programmed library of NAD remote codes.
The NAD HTR 6 is ready to operate the VISO TWO right out of the box, but it is really eight remotes in
one. Each of the 8 Device Selector keys at the top of the handset can call up a new “page” of remote
control codes to be transmitted by the remaining 44 keys. You may “teach” codes from any infrared-
remote controlled component, regardless of brand, to any or all of these.
Obviously, the most logical system is that you teach the codes from your DVD player to the [DVD]
Device Selector “page,” your television’s codes to the [TV] “page,” and so on, but there is no required
scheme: You may load any commands to any key on any page (see “Learning Codes From Other
Remotes,” below).
The HTR 6 is already preprogrammed with a full complement of commands for the VISO TWO on
its [AMP] Device Selector page, and as well as with library commands to operate most NAD-brand
DVD or CD components on the corresponding Device Selector “pages.” These default commands are
permanent: Even if you teach the HTR 6 new commands to take their place, the underlying library
commands remain in place and can easily be recalled should you add an NAD component to your
system later (see “Delete Mode”, below).
NOTE
ForusewiththeVISOTWO,itshouldnotbenecessarytore-programanykeysontheHTR6[AMP]
page.However,inorderfortheHTR6tocontrolyourspecicNAD-brandcomponentsyoumay
needtoloadoneormoredierentcode-libraries(see“LoadingCodeLibraries,”below).
CONTROLLING THE VISO TWO
The HTR 6 is divided into two main sections. Eight Device Selector keys at the top—[AMP], [DVD],
[TV] and so on—set the handset’s remaining keys to a “page” of commands to control a particular
component. A Device Select key determines only what component the HTR 6 will command; it does
not perform any function on the VISO TWO. All of the remaining keys are function keys that can “learn”
control codes from virtually any infrared remote controller, allowing you to teach the codes of your
equipment, regardless of brand, to the HTR 6.
However, the HTR 6 is already preprogrammed to operate the VISO TWO. All of the function keys on
the [AMP] Device Selector “page” perform VISO TWO functions. (The HTR 6 can also command many
other NAD components, from its [DVD], [CD], [TUNER] and [CUSTOM] pages.)
It is important to note that certain HTR 6 keys perform dierent functions depending on the selected
Device Selector “page.” The color of the Device Selector key-labeling corresponds to the labeling of
the function keys. Most centrally, the orange [AMP] Device Selector “page” corresponds to the orange
input-select labeling above the numeric keys: When the HTR 6’s [AMP] Device Selector page is active,
these keys select the VISO TWO inputs. Similarly, the purple [DVD] Device Selector “page” corresponds
to several purple labels, the green [TV] page to green labels, and so on.
SELECTING SOURCES
To directly switch or select sources using the HTR 6, set rst your DEVICE SELECTOR to “AMP”. Press
the corresponding numeric key of the source you want to select (the orange label directly above
the appropriate numeric keypad is the Source allocated for such key). For example, press “2” to select
“Cable/Sat” source mode, “1” to switch to “DVD” mode and so on.
OPERATION
USING THE HTR 6 REMOTE CONTROL
28
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD VISO TWO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO TWO in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO TWO

NAD VISO TWO User Manual - German - 34 pages

NAD VISO TWO User Manual - Dutch - 34 pages

NAD VISO TWO User Manual - French - 36 pages

NAD VISO TWO User Manual - Italian - 34 pages

NAD VISO TWO User Manual - Swedish - 34 pages

NAD VISO TWO User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info