Manual NAD VISO TWO (page 15 of 34) (English)

602923

Zoom out

Zoom in

1/34

INPUT SETTINGS

INPUT

Aside from the VISO TWO’s internal DVD, the VISO TWO is also equipped with

the following audio/video source inputs - “Cable/Sat”, “VCR” (iPod) and “Front”

(Front Input on the front panel). The input becomes active whenever it is

selected.

Use [ ] select through DVD, Cable/Sat, VCR (iPod) and then back to DVD.

VIDEO IN

A particular video input can be assigned to any of the following source

inputs - Cable/Sat, VCR (iPod) and Front. Ideally, a video input present at

the video input of a particular source input should be assigned to the same

source input. For example, a video input present at S-video input of VCR

should be the assigned video input for VCR source input. This is actually the

default setting. This can be varied though by assigning a dierent active

video input other than the particular source’s default video input setting.

AUDIO IN

Incoming digital and audio signals present at either digital or analog audio

are assignable to any of the following source inputs - Cable/Sat, VCR and

Front. Use [ ] to assign coaxial, optical or analog audio to any of the

aforementioned sources.

The assigned audio input will always be recalled whenever that input is

selected using the front panel INPUT SELECTOR knob or the HTR 6 remote’s

input-select buttons.

It is not necessary to connect at the same time both analog audio and

digital audio input for every video input you employ. It is preferable to

make only digital audio link to the VISO TWO for audio playback. This avoids

possible confusion and ensures that the VISO TWO’s high performance

digital audio circuitry will always be employed.

SPEAKER SETTINGS

Every system requires “bass-management” to direct low-frequency content

from any or all channels to the speakers best able to reproduce it. For this

function to operate correctly, it is important that you correctly identify your

speakers’ capabilities. We use the terms “Large”, “Small”, “Mini” and “O”, but

note that physical size may be irrelevant.

• A “Small” speaker is any model, regardless of physical size, that lacks

signicant deep-bass response. Set to SMALL if your speaker cannot

handle lower than 100 Hz.

• A “Large” speaker is any full-range model, that is, one with deep-bass

response. Set to LARGE if your speaker can handle 20 Hz - 20 kHz full

frequency range.

• Select “Mini” if your speaker cannot handle lower than 150Hz.

• Set “Subwoofer” to “On” or “O”, selecting “On” only if you have a

subwooder connected to VISO TWO’s SUBW output jack.

• An “O” speaker is one that may be present such as a subwoofer but set

to “O” in the “Speaker Settings” setup menu.

The “Speaker Settings” is “global”; that is, it remains in force with all inputs

and in all LISTENING MODES.

ENHANCED BASS

When the subwoofer is set to ON and speakers are set to “Large”, Enhanced

Bass is also available. Normally, with Front speakers set to “Large” the

subwoofer is not active. The Enhanced Bass option allows full range

operation of the speakers with the additional bass contribution of the

subwoofer. This feature is particularly useful when one wants to experience

maximum bass output. Please note that due to acoustic cancellation

eects, the bass response may be uneven when using this setting.

You can set Subwoofer to “On” even with “Large” front speakers. In such cases,

both subwoofer and front speaker will receive the LFE-channel signal. In the

case where the front speakers are set to “Small” the LFE-channel signal will be

routed to subwoofer but not to the front speakers; LFE-channel signal will pass

only to the subwoofer. In most subwoofer-equipped systems, setting front

speakers to “SMALL” is usually the better option.

CHANNEL LEVELS

Adjusting the relative balance of your system’s loudspeakers ensures that

recordings, whether music or lm, will present the balance of eects,

music, and dialog that the artists intended. Additionally, if your system

incorporates a subwoofer it establishes a correct relationship between the

volume of the subwoofer and the speakers, and thus of low-frequencies

(bass) to other sonic elements.

OPERATION

USING THE VISO TWO  AUDIO SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO TWO in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO TWO

NAD VISO TWO User Manual - German - 34 pages

NAD VISO TWO User Manual - Dutch - 34 pages

NAD VISO TWO User Manual - French - 36 pages

NAD VISO TWO User Manual - Italian - 34 pages

NAD VISO TWO User Manual - Swedish - 34 pages

NAD VISO TWO User Manual - Spanish - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NAD VISO TWO Manual

Product: