602923
13
Zoom out
Zoom in
Previous page
1/34
Next page
MUTING THE SOUND
Use the HTR 6’s “MUTE” key to silence all channels completely (“Mute is
displayed in the lower line of the VFD). Muting is always available regardless
of the source or listening mode selections.
NOTE
Adjustingthemaster-volumeviatheHTR6orthefront-panelknob
automatically releases the mute function.
ADJUSTING THE SUBWOOFER LEVEL TRIM ON THE FLY”
You can make changes to the relative level of subwoofer output. This may
prove useful in a number of circumstances; for example to reduce excessive
deep bass (or enhance deep bass) by lowering (raising) the subwoofer level.
Use the HTR 6’s ‘SUB keys for direct-access level adjustment of these
channels over a range of ±12 dB.
ADJUSTING THE TONE CONTROLS
The VISO TWO bass and treble controls are adjusted using the front panel’s
[TONE] button in conjunction with the VOLUME knob.
Referring to the lower line of the VFD, toggle [TONE] button to select “Bass”,
Treble”, Tone Active” or Tone Defeat”. While at either Bass or Treble mode,
rotate VOLUME knob clockwise or counterclockwise to adjust the Bass or Treble
level within the range ±12dB.
Bass and treble settings aect only the front left/right channels, and are
active in all SURROUND MODES.
Select Tone Defeat” to bypass the Tone Controls eectively defeating
the eect of the tone control circuits. If Tone Active is selected, the Tone
Control circuits are active.
FACTORY DEFAULT SETTINGS
Sometimes power spikes and drop-outs may from time to time cause some
inadvertent functionality. The procedure below will set the VISO TWO to
factory default settings
1 Place the VISO TWO into AM mode.
2 Press quickly the three front panel buttons: [PLAY/PAUSE], [STOP] then
[DISPLAY], holding the “DISPLAY” button for more than 7 seconds. The
VISO TWO will switch itself o, then back ON to DVD mode.
Please note that setting the VISO TWO to factory default will delete all AM,
FM and DAB presets. It will also reset all your timer settings.
SETUP
SETTING UP THE VISO TWO
13
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD VISO TWO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO TWO in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO TWO

NAD VISO TWO User Manual - German - 34 pages

NAD VISO TWO User Manual - Dutch - 34 pages

NAD VISO TWO User Manual - French - 36 pages

NAD VISO TWO User Manual - Italian - 34 pages

NAD VISO TWO User Manual - Swedish - 34 pages

NAD VISO TWO User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info