602906
8
Zoom out
Zoom in
Previous page
1/40
Next page
1 FM ANTENNA TERMINAL
• Connect the supplied lead-type FM antenna to the FM antenna
input. Extend the lead. Experiment freely with your antenna
placement and orientation until you get the clearest sound and
lowest background noise. Fix the antenna in the desired position by
using thumb tacks, push pins or any suitable means.
AM ANTENNA TERMINAL
The AM loop antenna supplied with the T 748 (or a suitable
replacement) is required for AM reception.
• Connect the supplied AM loop antenna to these terminals. If an
external AM antenna is used, make connections to the AM and GND
terminals in accordance with the instructions supplied with the
antenna.
• Testing dierent positions for the antenna may improve reception;
vertical orientation will usually produce the best results. Antenna
proximity to large metal objects (appliances, radiators) may impair
reception, as will as attempts to lengthen the wire to the loop.
• Refer also to the item about ASSEMBLING THE LOOP ANTENNA at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
2 AUDIO 1-2/VIDEO 1-2/S-VIDEO
• These comprise the T 748’s other sets of principal input. Connect
these S-Video, composite video, and analog audio input ports to
the corresponding output ports of source components such as DVD
players or cable/satellite boxes.
• AUDIO 2 IN and S-VIDEO IN are the assigned default ports for the
audio/video output of the separately sold NAD IPD (NAD IPD Dock
for iPod) 1, NAD IPD 2 and later variants.
3 MONITOR OUT
• Connect to the video input of a monitor/television using quality
dual-RCA cables designed for video signals.
4 COMPONENT VIDEO INPUT
• Connect the Component Video Input to Component Video output
of compatible source components, typically a DVD player, BD player,
digital cable box or other applicable components.
• Be sure to observe consistency in connecting the Y/Pb/Pr jacks to
the corresponding sources.
5 AUDIO 3 IN/OUT
• Connect AUDIO 3 OUT to the corresponding analog audio input
of a recording component such as a cassette deck, CD recorder or
to an outboard audio/video processor. Connect AUDIO 3 IN to the
component’s corresponding analog audio output connectors.
• The signal present at the AUDIO 3 OUT is determined by the source
last selected via the front panel Source keys or the AVR 4’s input
select keys with the exception of Source 3 or Source 4. If the default
settings are maintained for both Source 3 and Source 4 (analog
audio input is AUDIO 3) and both their respective digital audio
input is set to “O, there will be no output at AUDIO 3 OUT when
Source 3 or Source 4 is selected. This prevents feedback through the
recording component thereby preventing possible damage to your
speakers.
IDENTIFICATION OF CONTROLS
REAR PANEL
1 2 3 4 6 7 8
13 14
5
9 10 11 12
15
ATTENTION!
Please make sure that the T 748 is powered o or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
8
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T748v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T748v2 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T748v2

NAD T748v2 User Manual - German - 40 pages

NAD T748v2 User Manual - Dutch - 40 pages

NAD T748v2 User Manual - French - 40 pages

NAD T748v2 User Manual - Italian - 40 pages

NAD T748v2 User Manual - Portuguese - 40 pages

NAD T748v2 User Manual - Swedish - 40 pages

NAD T748v2 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info