602917
40
Zoom out
Zoom in
Previous page
1/46
Next page
FACTORY RESET
The HTR 3 can be reset to its factory state, deleting all learned commands, copied and punched-
through keys, macros, and other setup information, reverting all keys to their pre-programmed library
commands.
To perform a factory reset simultaneously press-and-hold for 10 seconds the HTR 3’s [ON] and
[RTN] keys; the Learn LED will start to ash green. Release [ON] and [RTN] before the second ash is
complete; the Learn LED will turn red, indicating the remote has been reset.
NOTE
Youmustrelease[ON]and[RTN]beforethesecondashgoesout,otherwisetheunitwillnotreset;
shouldthisoccur,repeatthefullprocedure.
DELETE MODE
The HTR 3 can store learned, copied, and default library commands on any single key (The default
library commands are the pre-programmed NAD codes, such as the native T 775 commands on the
[AMP] “page.”).
You can delete commands by layers back down” to the default library command on any key, removing
learned commands, punched-through functions, and copied keys.
NOTE
Thedefaultlibrarycommandscannotbedeleted,soyouneednotworrythatusingDeleteMode
mightcauseirreparablechanges.
To enter Delete Mode, simultaneously press-and-hold for 3 seconds both the desired keys Device
Selector key and the [RTN] key, until the Learn LED turns green. Press the function key whose
command you wish to delete; the Learn LED ashes; the number of times indicates which type of
function has become active - see the table below. Press the active Device Selector key again to exit
Delete Mode.
NOTE
Youmaydeletemultiplefunction-keycommandsonthesameDeviceSelector“page,”buttodelete
frommorethanoneDeviceSelectorpageyoumustexitDeleteModeandthenre-enteritonthe
required page.
Flashes Command Type
1 Default Library Command
2 Copied Library Command
3 Learned Command
OPERATION
USING THE HTR 3 REMOTE CONTROL
40
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 775 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 775 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 775

NAD T 775 User Manual - German - 44 pages

NAD T 775 User Manual - Dutch - 44 pages

NAD T 775 User Manual - French - 46 pages

NAD T 775 User Manual - Italian - 44 pages

NAD T 775 User Manual - Swedish - 42 pages

NAD T 775 User Manual - Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info