602917
21
Zoom out
Zoom in
Previous page
1/46
Next page
AUDYSSEY MultEQ XT ROOM ACOUSTICS CORRECTION
Sound reecting from room boundaries can disturb the spatial illusion
of surround sound, and can also distort the tonal balance of the system.
Professional Acoustical Engineers often add wall treatments and even move
walls and relocate speakers to improve system performance, but for the
average Home Theatre, this is either too expensive or just not a practical
solution.
Audyssey MultEQ XT, using multiple measurements from the actual
listening positions, and processing this information using very sophisticated
digital signal processing, is able to “precondition the signal to eectively
make the walls disappear. This creates a ‘family size’ sweet spot where the
sound and spatial cues are very accurately reproduced.
MultEQ XT is designed to tame room acoustics without changing the sonic
character of your loudspeakers. While it will make the most of whatever
loudspeakers you have, it will not make poor speakers sound like good
ones!
Connect the Audyssey microphone jack into the front panel’s MP/MIC input
and the Audyssey Auto Calibration wizard will guide you through a simple
step-by-step conguration. Once setup and calibrated, the next greatest
improvement in performance is obtained by eliminating the acoustic
interference caused by room boundaries interacting with your speakers.
MEASUREMENT IS THE FIRST STEP
The sound at each listening position (up to 8 positions) is calibrated using
the same microphone used during the setup phase.
A special test tone is sent to each speaker and the data is memorized by
the T 775. The duration of calibration may take some time depending on
the number of speakers as well as the number of measuring points. After
all positions are measured, the DSP calculates the ideal system response for
your particular room and speaker setup.
If some inconsistencies or discrepancies are detected during the Audyssey
calibration, the process maybe interrupted or the problem is shown in the
particular setup window. A notice screen is correspondingly displayed.
After following and undertaking the displayed instructions, re-start the
Audyssey calibration again. When the measurements are nalized, Audyssey
calculates the ideal system response for your particular room and speaker
setup.
NOTE
Thetesttoneemittedduringmeasurementisloud.Thismaybe
bothersomeforyouandmayaectyourotherhouseholdmembersas
well,andevenyourneighbor.
NEXT A TARGET CURVE MUST BE CHOSEN
Because loudspeaker designers assume that their products will be used in
typical domestic rooms, they are voiced’ to work in this environment. It is
assumed that the room will add some bass reinforcement and will absorb
some treble energy. Thus if we eectively ‘remove the walls with room
correction, and set the speakers for at response, you may nd this sounds
too bright in the treble and too weak in the bass region.
NAD engineers have done extensive research in this area of room acoustics,
and along with Audyssey engineers developed what we believe is the ideal
‘in room’ response curve. We include this NAD EQ, along with an Audyssey
developed EQ as the two best choices. The response curves shown below
typify NAD EQ room correction process.
Room Response measured by Audyssey microphone
Inverse Correction Filter calculated by NAD T775
Corrected Room Response
Flat EQ is a third option, but not one that we recommend for listening
(it is useful for verifying system performance when using external
instrumentation).
Select the Target Curve you nd to be most satisfactory by pressing the
Audyssey key of the remote. The MultEQ XT corrected response can also be
bypassed if you wish.
It is recommended that you take full advantage of the T 775’s Audyssey
Auto Calibration feature for your speaker setup. However, if you desire to
setup your speakers manually or if you already had run Audyssey Auto
Calibration but would like to make adjustments, the following sections on
Speaker Conguration, Speaker Levels and Speaker Distance can also be
followed and implemented.
NOTE
Duringmanualsettingofyourspeakers,previouslycalibrated
Audysseysettingscouldberetrievedbyre-adjustingbackthealtered
congurationsashighlightedbyanasterisk.
OPERATION
USING THE T 775 SETUP MENU
21
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 775 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 775 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 775

NAD T 775 User Manual - German - 44 pages

NAD T 775 User Manual - Dutch - 44 pages

NAD T 775 User Manual - French - 46 pages

NAD T 775 User Manual - Italian - 44 pages

NAD T 775 User Manual - Swedish - 42 pages

NAD T 775 User Manual - Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info