745046

NAD T 758 Manual

20
Zoom out
Zoom in
Previous page
1/42
Next page
SOURCE SETUP
There are three sub-menu items under Source Setup. These are Source
Setup (Normal View), Source Setup (Table View) and iPod Setup.
SOURCE SETUP (NORMAL VIEW)
The Source Setup (Normal View) menu makes it possible to set, allocate or
change the following settings.
SOURCE
The T 758 is equipped with ten congurable Sources. The settings for each
Source are dependent upon the congurations set forth in the parameters
for that particular Source window.
To change or toggle through the Sources, scroll to “Source”, press [S] button
and then ENTER or [D/F]to move up or down the Source selections.
NOTE
Source 5 is defaulted to iPod. Remove the default setting of Source 5 to
iPod via the following procedure:
1 Go to “iPod Setup” menu under the “Source Setup” menu. At “iPod
Setup” menu, set “Enabled” to “No”.
2 Then, go back to “Source Setup” menu and select “Source Setup (Normal View).
3 Go to Source 5 and set “Enabled” to “Yes”.
Source 5 can now be congured to any desired settings.
ENABLED
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
Select “Yes” to enable the particular Source or “No” to disable the Source.
NAME
A new Name maybe assigned to a Source label. For example, if your BD player is
attached to “Source 1”, it is possible to rename “Source 1” to “BD Player”.
In order to rename the Source label, scroll to the “Name” parameter. Press
[ S ] to go to the rst character. Then, press [ D/F ] to pick through the
alphanumeric selections.
Press [ S ] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as twelve
characters.
The new Name will be shown in the VFD as well as on the OSD.
ANALOG AUDIO
The T 758 has six analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio Front, Audio MP and 7.1 Input can
be variably assigned to each Source.
Scroll to “Analog Audio” and then press [ S ] and then [ D/F ] to select
and assign an analog audio input to the particular Source. There are three
choices - Audio, 7.1 Input or O.
When “Audio” is chosen, press [ S ] and then [ D/F ] to select and assign
the desired audio input - 1 to 3, Front and MP.
Select “7.1 Input” to choose the audio signal fed to the “7.1 Channel Input”.
If “O’ is selected, no incoming analog audio signal is selected by the
particular Source.
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
“O” at the “Digital Audio” setting of the same “Source” menu.
GAIN
Gain adjustment allows all sources to play back at the same volume level so
you don’t need to adjust the volume every time a new source is selected. It
is generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to “Gain”, press [ S ] and then [ D/F ] to step through the desired
level from -12dB to 12dB.
OPERATION
USING THE T 758  SETUP MENU
20
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 758 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 758 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 758

NAD T 758 User Manual - German - 42 pages

NAD T 758 User Manual - Dutch - 42 pages

NAD T 758 User Manual - French - 44 pages

NAD T 758 User Manual - Swedish - 42 pages

NAD T 758 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info