745046
19
Zoom out
Zoom in
Previous page
1/42
Next page
VOLUME
Volume refers to the adjustable secondary Zone 2 Volume level that can
be increased or decreased depending upon its settings. This is applicable
only if the Zone 2 Volume setting in the separate “Zone Setup menu under
“Setup Menu” is set to Variable. If set to “Fixed”, this “Volume item at the
Zone Controls section will not be available.
NOTES
If Zone 2 is still ON and STANDBY button is pressed to switch the T 758
to standby mode, the VFD will be extinguished but the STANDBY LED
remains illuminated blue. This indicates that Zone 2 is still active. In
order to completely shut down the T 758 together with Zone 2, press and
hold STANDBY button until the STANDBY LED turns amber.
Zone 2 is audio only and not associated with any video input sources.
SETUP MENU
The Setup Menu allows one to customize the operation of the T 758 to the ancillary
equipment used in one’s specic AV system. Unless your system exactly matches
the factory defaults as shown in the accompanying Quick Start Guide, you will need
to use the setup menu to congure the inputs of the T 758.
At Setup Menu, the following are congurable – Control Setup, Source
Setup, Speaker Setup, Zone Setup, Amplier Setup, Trigger Setup, Listening
Mode Setup, Display Setup and A/V Presets.
To access and navigate through Setup Menu and its sub-menu selections,
please refer to and follow the directions stated in the sections ‘Display the
OSD’ and ‘Navigating the OSD and Making Changes.
CONTROL SETUP
The T 758 supports HDMI Control (CEC) and Audio Return Channel (ARC)
functions. Both functions are possible if external devices that also support
both features are interconnected with the T 758 via HDMI connection.
AUTO STANDBY
The T 758 can be setup to automatically go to standby mode if there is no
user interface interaction within 30 minutes.
On: T 758 will go to standby mode automatically in the absence of any
user interface interaction within 30 minutes.
O: T 758 remains active even though no user interface interaction is
detected.
CEC IN STANDBY
On: Enable CEC feature. Audio and video will continuously stream from
a CEC-enabled HDMI source to a CEC-enabled TV (with both devices
connected via T758).
O: T758 will not pass through any CEC message. Audio and video will
not be streamed from a CEC-enabled HDMI source to a CEC-enabled TV
(with both devices connected via T758).
HDMI CONTROL CEC
Consumer Electronics Control (CEC) is a set of commands that utilizes
HDMI’s two- way communication to allow for single remote control of any
CEC-enabled devices connected with HDMI. A CEC command will trigger
the necessary commands over HDMI for an entire system to auto-congure
itself to respond to the command.
When devices that support HDMI Control (CEC) are connected, the
following modes of operation can be executed via the T 758 or the external
device using any of the device’s remote control.
O: Applies to all CEC options below. At “O setting, particular CEC feature
is defeated.
Power O: At “On” setting, the T 758 will automatically go to
standby mode if it receives a CEC standby command. On the other
hand, if the T 758 receives a CEC power up command, the T 758 will
correspondingly switch ON from standby mode.
Source Switch: At “On setting, the T 758 will automatically switch
sources if another CEC device requests a Source change.
For example, if PLAY is pressed on a BD Player with CEC, the T 758
and TV with CEC will automatically switch to their respective input
connections – the T 758 switching to the HDMI input where the BD
Player is connected while the TV will switch to its input where the
T 758’s HDMI MONITOR OUT is connected. This completes the auto-
conguration – the BD Player is automatically played back using the
T 758 and TV.
Audio System: At “On setting, the T 758 will broadcast a CEC message
indicating it is an active audio system. A CEC compatible TV will usually
mute its audio output when this happens. When this option is enabled,
the T 758 will also respond to CEC volume and mute commands. For
example, a CEC TV may forward the volume commands from its remote
to the T 758.
ARC Mode: Audio Return Channel (ARC) enables an ARC-enabled TV
to send audio data upstream to T 758.
This option has three choices: O, Auto or Source Setup.
Auto: When set to Auto, the T 758 will automatically attempt an
ARC audio connection to the TV whenever the TV announces over
CEC that it has become the active source. If an ARC connection can
be established, the T 758 will output the ARC audio signal no matter
what source is selected on the T 758 and will show “HDMI ARC” on
the VFD. The Auto option tends to work best when all your devices
support CEC and the Source Switch option is set to On.
Source Setup: When set to Source Setup, you can select ARC” for
the digital audio input in the source setup screen. When you select
a source on the T 758 which is set for ARC, the T 758 will attempt
to initiate an ARC connection with the TV. When using this option,
you would probably also want to make sure Source Switch is o
otherwise other CEC devices may keep changing the T 758 source
when you want it to remain on the ARC source.
IMPORTANT NOTES
Audio System” must be set to “On” for “ARC mode” to manifest as an
option.
“CEC in Standby” must be set to “On” for audio and video to
continuously stream from a CEC-enabled HDMI source to a CEC-enabled
TV (with both devices connected via T 758).
OPERATION
USING THE T 758  SETUP MENU
19
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 758 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 758 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 758

NAD T 758 User Manual - German - 42 pages

NAD T 758 User Manual - Dutch - 42 pages

NAD T 758 User Manual - French - 44 pages

NAD T 758 User Manual - Swedish - 42 pages

NAD T 758 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info