493497
33
Zoom out
Zoom in
Previous page
1/42
Next page
AUTOMATIC PRESET
Preset stations may also be programmed automatically for the entire FM (or
AM) band.
1 Select FM or AM band by repeatedly pressing [AM/FM/DB] until FM or
AM mode appears.
2 Press and hold the AVR 3’s [MEMORY] button until the station frequency
indication begins to increase.
3 Release the button and note that the tuner will search the entire FM
(or AM) band, and stop briey at each station that has acceptable
signal strength. The T 747 will automatically assign a preset number to
each station, and then search for the next station. Up to 30 of the best
received FM stations (or 30 AM stations) will be automatically stored.
DELETING A STORED PRESET
You can empty a preset by deleting the stored information.
1 Select the preset number to be deleted.
2 While at the selected preset number, press the AVR 3’s [DELETE] button.
3 The preset will then be deleted and “DELETED” scrolls on the display.
4 To clear all the Presets at the same time, repeat step 2 again but this
time do not release the [DELETE] button. Press and hold [DELETE]
button until the current Preset number shown in the VFD is
extinguished (P--). All Presets are now deleted.
CHOOSING THE TUNER MODE
The AVR 3’s [TUNER MODE] key is a dual-purpose control. Toggle [TUNER
MODE] to switch between FM Stereo mode and FM Mono. In the normal
position, “FM STEREO ON”, only the stations with a strong signal can be
listened to, and the noise between stations is muted.
Pressing the [TUNER MODE] button again (“FM STEREO OFF”) allows distant
and potentially noisy stations to be received. Noise is reduced if the FM
station signal level is less than the FM Stereo threshold (since mono FM is
inherently less noise-prone) though at the sacrice of the stereo eect.
ABOUT USER NAMES
You can assign an eight character “User Name to each radio preset, which
will show in the front-panel readout whenever that preset is recalled.
ENTERING USER NAMES
To name a radio preset “NEWS”, follow the procedure as below.
1 Recall the desired radio preset.
2 Then, press and hold [INFO] of the AVR 3 until the display shows a
ashing cursor point.
3 Use the [ ] buttons to select the rst character of the name (“N”
from the alphabetical list).
4 Press [ ] button to select the character and correspondingly move
forward to the next position. (Press [ ] to go back to the previous
character). Repeat this process for each character in sequence.
5 Press the [MEMORY] key to store the User Name and exit the text-entry
mode.
ABOUT RDS
The Radio Data System (RDS) permits sending small amounts of digital
information using conventional FM radio broadcasts. The T 747 supports
two RDS modes, station-name (PS mode) and radio-text (RT mode). Not
every FM station incorporates RDS in its broadcast signal. In most areas you
will nd from one to several RDS-enabled stations, but it is by no means
impossible that your favorite stations will not be broadcasting RDS data.
VIEW RDS TEXT
When an RDS-enabled FM broadcast is tuned, the readout’s character section
will show its station-name (PS) text: “ROCK101”, for example.
Press the AVR 3’s INFO key to toggle the readout between this and the stations
radio-text (RT) readout, if any, which might scroll song- or artist-name, or any
other text of the station’s choosing.
OPERATION
LISTENING TO AM/FM RADIO
33
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 747 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 747

NAD T 747 User Manual - German - 42 pages

NAD T 747 User Manual - Dutch - 42 pages

NAD T 747 User Manual - French - 46 pages

NAD T 747 User Manual - Italian - 42 pages

NAD T 747 User Manual - Swedish - 42 pages

NAD T 747 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info