493497
30
Zoom out
Zoom in
Previous page
1/42
Next page
FRONT PANEL DISPLAY SETUP
The Vacuum Fluorescent Display (VFD) and On-Screen Display (OSD) can be
shown in various ways by navigating through the parameters at the “Front
Panel Display Setup menu.
DISPLAY
Select “On” to display all applicable data or characters at the VFD. Nothing
will be shown at VFD if Temp” is selected. However at Temp” setting,
whenever any of the front panel controls or their corresponding keys in the
remote control is activated, the appropriate VFD characters will be shown
temporarily and then fade away.
DIMMER
If it is desired to reduce the brightness of the VFD, set Dimmer to “Dim.
Otherwise, select “Bright to return to normal VFD brightness.
LINE 1, LINE 2
The VFD shows two main lines of data or characters. Line 2 is the line of
data or characters located at the lower bottom of the VFD while directly
above it is Line 1. For both lines, one can select which display could be
shown by choosing through the following
Main Source: Shows the active Source.
Volume: Current Volume level is shown.
Listening Mode: Selected Listening Mode is shown.
Audio Src Format: Shows the audio format detected at the active Source.
Zone 2 Source: The assigned Source for Zone 2 is shown.
O: Select “O if it is desired not to show any data at the applicable Line.
TEMP LINE
Choose between Line 1 and Line 2 as the desired line where VFD will be
temporarily shown if Temp” is selected at “Display” option as described
above.
NOTE
The congurations set forth at “Front Panel Display Setup” are carried
over whenever it is enabled during A/V Preset setting. Refer also to the
item about A/V PRESETS under the USING THE T 747 – SETUP MENU
segment of the OPERATION section.
VIDEO SETUP
This menu allows you to set the display resolution of the T 747 along with
the compatible video format setting and picture setup.
VIDEO FORMAT
There are 2 options under Video format – Resolution to Display and
Frame Rate.
Resolution to Display: The T 747 has the excellent ability to
upconvert standard denition video contents to high denition video
signal. Depending upon your TV/Monitors resolution capabilities, select
the applicable resolution settings - Auto, 480i/576i, 480p/576p, 720p,
1080i and 1080p. When Auto is selected, the T 747 automatically selects
the highest resolution compatible with the connected TV/Monitor.
Note that if the display is connected to Composite or S-Video Monitor
OUT, the video output resolution must be set to 480i or 576i to view
content.
When you change the resolution setting, you will be prompted to Save
or Cancel the resolution change as per the message shown in OSD.
IMPORTANT NOTE
Some TV/Monitors may not be able to handle simultaneous High
Denition (HD) video input contents of 720/1080 as fed through their
HDMI and Component Video inputs. If T 747’s “Resolution to Display
setting is set to “Auto” and a source input is fed to any of the T 747’s
HDMI IN rear panel ports and HDMI MONITOR OUT connected to a video
display, component video output will only be available at 480i/576i or
480p/576p resolution. At this condition, changing the resolution setting
from “Auto” to a high denition setting like 720p, 1080i or 1080p may
result to a distorted display at Component Video Monitor OUT.
In order to attain a high denition setting at Component Video Monitor
OUT, there should be NO connection made through any of the HDMI
inputs and HDMI Monitor OUT. It is suggested to use standard denition
resolution for simultaneous output and use EITHER Component or HDMI
for high denition output.
OPERATION
USING THE T 747  SETUP MENU
30
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 747 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 747

NAD T 747 User Manual - German - 42 pages

NAD T 747 User Manual - Dutch - 42 pages

NAD T 747 User Manual - French - 46 pages

NAD T 747 User Manual - Italian - 42 pages

NAD T 747 User Manual - Swedish - 42 pages

NAD T 747 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info