493497
10
Zoom out
Zoom in
Previous page
1/42
Next page
18 ZONE 2 FIX, ZONE 2 VAR: Connect both ZONE 2 FIX and ZONE 2 VAR
to the corresponding audio input of an external integrated amplier,
preamplier or receiver.
FIX: When FIX is the selected ZONE 2 audio output port, the ZONE 2
volume level can only be varied by using the VOLUME control of the
external amplier or receiver it is connected to. Neither the front panel
VOLUME nor ZR 5’s [VOL ] can vary Zone 2 audio output.
VAR: If VAR is the selected ZONE 2 audio output port, the Zone 2
volume level can be adjusted depending upon the setting of the
Volume item (either Fixed or Variable setting) in the Zone 2 Controls
OSD menu.
For a better understanding of Zone 2 features, refer to the item about
ZONE 2 CONTROLS under the USING THE T 747 - MAIN MENU segment
of the OPERATION section.
19 AUDIO 5 IN/OUT, AUDIO 6: Input for additional line level input signals
such as CD player, MP player or other line-level signal source. Connect
AUDIO 5 OUT to the analog audio input of a recording component such
as a CD recorder or to an outboard audio/video processor. Connect the
AUDIO 5 IN jacks to the component’s corresponding output.
AUDIO 6 IN is ideal for the connection of the analog output of line-level
audio sources like a CD player or Stereo tuner.
20 SPEAKERS: Connect the respective speakers FRONT L, FRONT R,
CENTER, SURR R, SURR L, SURR-BL channels to their corresponding
loudspeakers. Make sure the “+” (red) terminal and “-” (black) terminal are
connected to the corresponding “+” and “-” terminals of the loudspeaker.
Use extra care to ensure that no stray wires or strands cross between
posts or terminals at either end.
The T 747 is designed to produce optimum sound quality when connected
to speakers with impedances within its operating range. Please make sure
that all the speakers are rated 8 ohms minimum per speaker.
NOTE
Use stranded wire of at least 16 gauge (AWG). Connections to the T 747
can be made with banana plugs (120 V version model only) or by using
bare wire or pins. Use the transverse hole through the post for bare-wire
or pin connections. By loosening the terminal’s plastic nut, make a
clean, neat connection and re-tighten carefully. To minimize the danger
of short-circuit, ensure that only 1/2-inch of exposed wire or pin is
employed when connecting.
21 SWITCHED AC OUTLET: This convenience outlet can supply switched
power to another component or accessory. It is powered ON and OFF
by the front panel POWER button or by the AVR 3’s ON and OFF keys.
The total draw of all devices connected to this outlet must not exceed
100 watts.
22 AC MAINS INPUT: The T 747 comes supplied with a separate AC Mains
cable. Before connecting the cable to a live wall socket, ensure that it
is rmly connected to the T 747’s AC Mains input socket rst. Connect
only to the prescribed AC Outlet, i.e., 120V 60 Hz (for 120V version
models of T 747 only) or 230V 50 Hz (for 230V version models of T 747
only). Always disconnect the AC Mains cable plug from the live wall
socket rst, before disconnecting the cable from the T 747’s Mains input
socket.
IDENTIFICATION OF CONTROLS
REAR PANEL
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 747 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 747

NAD T 747 User Manual - German - 42 pages

NAD T 747 User Manual - Dutch - 42 pages

NAD T 747 User Manual - French - 46 pages

NAD T 747 User Manual - Italian - 42 pages

NAD T 747 User Manual - Swedish - 42 pages

NAD T 747 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info