493497
8
Zoom out
Zoom in
Previous page
1/42
Next page
1 DIGITAL AUDIO (COAXIAL 1-2, OPTICAL 1-2): Connect to the
corresponding optical or coaxial S/PDIF-format digital output of
sources such as CD or BD/DVD players, HDTV or satellite tuners and
other components. Coaxial and Optical digital input association is
congurable via the Source Setup item of the Setup Menu OSD.
DIGITAL AUDIO OUT (OPTICAL, COAXIAL): Connect the optical or
coaxial digital OUT port to the corresponding S/PDIF digital input of a
compatible device such as CD recorders, receivers, computer soundcard
or other digital processors.
2 MONITOR OUT (S-VIDEO, VIDEO): Connect to video input of the
monitor/television using quality dual-RCA and/or S-Video cables
designed for video signals. In general, the S-Video connection
is superior and should be used if your TV/monitor provides the
corresponding input.
3 AUDIO 1 IN/OUT, VIDEO 1 IN/OUT, S-VIDEO IN/OUT: Connect
AUDIO 1 IN/VIDEO 1 IN/S-VIDEO 1 IN to the analog audio/video output
port of a recording component such as a video cassette recorder, DVD
recorder or to an outboard audio/video processor. Connect AUDIO
1 OUT/VIDEO 1 OUT/S-VIDEO 1 OUT to the recording component’s
corresponding analog audio/video input port.
The signal present at AUDIO 1 OUT/VIDEO 1 OUT/S-VIDEO 1 OUT port
is dependent upon the current active SOURCE. There will be no output
at AUDIO 1 OUT/VIDEO 1 OUT/S-VIDEO 1 OUT when Source 1 is the
selected source input. This prevents feedback through the recording
component thereby preventing possible damage to your speakers.
4 AUDIO 2-4/VIDEO 2-4, S-VIDEO 2-4: These comprise the T 747’s
other principal inputs. Connect these S-Video, composite video, and
analog stereo audio input ports to the corresponding output ports of
source components such as DVD players and HDTV/satellite tuners.
Refer also to AUDIO 1 IN/OUT, VIDEO 1 IN/OUT, S-VIDEO 1 IN/OUT”
discussion above.
5 ZONE 2: Sends zone selected video output source to the
corresponding video input of another zone. Use high quality patch
cables to reduce noise pickup over long distance runs. Refer also to
the item about ZONE 2 CONTROLS under the USING THE T 747 - MAIN
MENU segment of the OPERATION section.
6 HDMI (HDMI 1-4, HDMI MONITOR OUT): Connect HDMI inputs to
the HDMI OUT connectors of source components such as DVD player,
BD player or HDTV satellite/cable box. Connect the HDMI Monitor OUT
to a HDTV or projector with HDMI input.
WARNING
Before connecting and disconnecting any HDMI cables, both the T 747
and the ancillary source must be powered OFF and unplugged from the
AC outlet. Failure to observe this practice may cause permanent damage
to all equipment connected via HDMI sockets.
7 COMPONENT VIDEO INPUT 1-3, COMPONENT VIDEO OUT:
Connect the Component Video Input 1-3 inputs to Component Video
outputs from compatible source components, typically a DVD player,
BD Player and terrestrial or satellite HDTV tuner. Connect Component
Video OUT to the Component Video input of a compatible video
monitor/TV. Be sure to observe consistency in connecting the Y/
Pb/Pr jacks to the corresponding sources/inputs. The routing of the
component video inputs is fully congurable via the Setup Menu.
The T 747’s component video inputs and outputs are fully wideband
and compatible with allowable HDTV formats.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the T 747 is powered o or unplugged before making any connections. It is also advisable to power down or unplug all associated
components while making or breaking any signal or AC power connections.
1 2 3 4 6 7 8 9 10
16 18 2017 19
5
14131211 15 2221
8
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 747 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 747

NAD T 747 User Manual - German - 42 pages

NAD T 747 User Manual - Dutch - 42 pages

NAD T 747 User Manual - French - 46 pages

NAD T 747 User Manual - Italian - 42 pages

NAD T 747 User Manual - Swedish - 42 pages

NAD T 747 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info