Manual NAD M32 DirectDigital DAC Amplifier (page 15 of 24) (English)

667811

Zoom out

Zoom in

1/24

Analog Gain: -12dB to 0dB. Gain adjustment allows all sources to play

back at the same volume level so you don’t need to adjust the volume

every time a new source is selected. It is generally preferable to reduce the

level of the loudest source rather than making louder the softer sources.

Sample Rate (48 kHz, 96 kHz, 192 kHz): Select the user’s preference

for sample rate of the Analog-to-Digital Converter. Higher sampling rates

allow for anti-aliasing lters to take eect further outside the audible

frequency range and are generally considered to sound better, especially in

the high frequencies. This option is applicable only for LINE 1 or LINE 2.

DIGITAL OUTPUT

SAMPLE RATE 48 kHz, 96 KHZ, 192 kHz

Audio inputs may come from various sources with dierent sampling rates.

Select 48 kHz, 96 kHz or 192 kHz to convert all digital audio output content

to single sampling rate.

CONTROL SETUP

AUTO STANDBY

Allows the option of the M32 going to standby mode after 15 minutes of

inactivity or remain at operating mode regardless of any source activities.

ON: M32 will automatically go to standby mode if there are no user

interface interaction and no active source within 15 minutes.

OFF: M32 remains at operating mode even if there is no user interface

interaction and no active source within 15 minutes. This is the default setting.

IR CHANNEL

The M32 has the capability to operate via Alternate IR channel. This is useful

if you have two NAD products that can be operated by similar remote

control commands. With alternate IR Channel, two dierent NAD products

can be controlled independently in the same zone by setting each one to a

dierent IR channel.

IR Channel Assignment

The M32 and the HTRM 2 remote control must be set to the same channel.

To change the IR Channel on the HTRM 2 remote control

• Include a channel number before the library code. For HTRM 2, library

code “100” is the default library table for “AMP” device. To select this

“AMP” library table for “IR Channel 0”, retain the library code “100”.

• If you want to load the “AMP” library table on “IR Channel 1”, prex the

library code with “1” to indicate association with “IR Channel 1”. Load

then the “AMP” library table using the code “1100”.

Sample setup of two NAD products on the same Zone

M32 and T 787 are both defaulted to IR Channel 0. If [OFF] button is pressed

on the HTRM 2 remote control (or HTR 8 remote control for the T 787), both

products will go to standby mode. Press [ON] and both products will power

up from standby mode.

To prevent both products from simultaneously going in and out of standby

mode along with other common commands, set each one to a dierent

IR channel. In this setup, we will keep T 787 and HTR 8 remote control

defaulted to “IR Channel 0”. As for M32, we will assign it to “IR Channel 1”;

the same applies to HTRM 2.

Set M32 and HTRM 2 to “IR Channel 1” via the following procedure.

M32

• Select “1” as the IR Channel setting of the M32.

HTRM 2

Ensure the M32 is powered-up (“on”, not merely in standby).

1 Press and hold together the [AMP] and [A/V PSET] buttons until the

Learn LED (located between HTRM 2’s ON and OFF buttons) turns

steady green. Release both buttons.

2 While keeping the HTRM 2 pointed towards M32, press “1”, “1”, “0” and “0”

using HTRM 2’s numeric buttons.

3 Press [OFF]. If the M32 goes to standby mode, this indicates that the

library input is successful.

4 Press [ENTER] to accept the library code input and exit the Library

mode.

With both M32 and HTRM 2 set to “IR Channel 1”, the M32 can now be

remotely controlled independent of the T 787.

NOTE

Performing a Factory Reset for HTRM 2 will result to a return to the

factory default “IR Channel 0” setting.

LISTENING TO COMPUTER

Use Type A to Type B cable connector to directly stream 24/192 PCM

content from your PC or MAC to the M32. Ensure that the Sound or Audio

device setting of your computer is set to “NAD USB Audio”.

MINIMUM PC SYSTEM REQUIREMENT

Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7

FOR MAC USERS

Minimum Mac OS X Snow Leopard (version 10.6) and later versions

OPERATION

OTHER FEATURES

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NAD M32 DirectDigital DAC Amplifier in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M32 DirectDigital DAC Amplifier

NAD M32 DirectDigital DAC Amplifier User Manual - German - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - Dutch - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NAD M32 DirectDigital DAC Amplifier Manual

Product: