562261
10
Zoom out
Zoom in
Previous page
1/38
Next page
8 MONITOR OUT (COMPOSITE VIDEO)
Connect to the video input of a monitor/television using quality
dual-RCA connectors designed for video signals.
9 ZONE 2-3-4
The M17 has three congurable Zones – Zone 2, Zone 3 and Zone
4. The Zone feature allows one to simultaneously experience in
a dierent zone or location of the house a Source assigned to a
particular zone.
Send zone selected audio and video output to the corresponding
audio and video input of another zone. Use high quality patch
cables to reduce noise pickup over long distance runs.
For a better understanding of zone settings, study below the section
about “Zone Controls” of the “Main Menu” discussion as well as the
item about “Zone Setup under the “Setup Menu” literatures.
NOTES
“Zone 4” is audio only and not associated with any video input sources.
Zone 2 and Zone 3 video output are available only if the corresponding
zone’s video source is composite video.
10 DIGITAL AUDIO IN (COAXIAL IN 1-4, OPTICAL IN 1-4)
Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
Coaxial and Optical digital input association is congurable via the
Source Setup item of the Setup Menu OSD.
DIGITAL AUDIO OUT (COAXIAL OUT 1-2, OPTICAL OUT 1-2)
Connect the optical or coaxial DIGITAL AUDIO OUT to the
corresponding digital audio input of compatible devices such as
receivers, computer soundcard or other digital processors.
11 ETHERNET/LOCAL AREA NETWORK (LAN) PORT
LAN connection must be setup for wired connection to be established.
Set up a Wired Ethernet broadband router with broadband internet
connection. Your router or home network should have a built-in DHCP
server to consummate the connection.
With Ethernet connection established, you can now control the
M17 using the NAD AVR Remote App that can be downloaded
from the Apple App store to your iOS device (iPhone, iPad or iPod
Touch). Ensure that your iOS device with the NAD AVR Remote App
is connected to the same network as the M17.
The NAD AVR Remote App automatically discovers your network-
connected M17 and walks you through controlling and adjusting
fundamental functions including power, volume, source selection
and other basic setup features.
The IP address of your network-connected M17 can be obtained.
Press and hold “Main” item in the front panel display menu until
below information is displayed.
NOTES
NAD is not responsible for any malfunction of the M17 and/or the
internet connection due to communication errors or malfunctions
associated with your broadband internet connection or other connected
equipment. Contact your Internet Service Provider (ISP) for assistance or
the service bureau of your other equipment.
Contact your ISP for policies, charges, content restrictions, service
limitations, bandwidth, repair and other related issues pertinent to
internet connectivity pertinent to internet connectivity.
12 HDMI (HDMI IN 1-6, HDMI MONITOR OUT 1-2)
Connect the sets of HDMI input to the HDMI OUT connectors of
source components such as DVD player, BD player or HDTV satellite/
cable box.
Connect the HDMI MONITOR OUT 1 and/or HMDI MONITOR OUT
2 to compatible HDTV or projector with HDMI input. Both HDMI
output ports display simultaneously the same audio/video source.
WARNING
Before connecting and disconnecting any HDMI cables, both the M17
and the ancillary source must be powered OFF and unplugged from the
AC outlet. Failure to observe this practice may cause permanent damage
to all equipment connected via HDMI sockets.
13 UNSWITCHED AC OUTLET (120V version model only)
With M17 switched ON or at standby mode, mains power is always
available at this outlet.
This outlet can be used for components that may require
continuous supply of AC mains; some tuners require uninterrupted
mains supply to retain preset memory, for instance.
The total draw of all devices connected to this outlet must not
exceed 120 watts.
Mains power at this outlet can be shut down by switching OFF the
M17 via the rear panel POWER switch.
14 AC MAINS INPUT
The M17 comes supplied with a separate detachable mains power
cord. Before connecting the plug to the mains power source,
connect rmly rst the other end to M17’s AC Mains input socket.
Always disconnect the mains power plug from the mains power
source rst, before disconnecting the cable from the M17’s AC
Mains input socket.
Connect only to the prescribed AC outlet, i.e., 120V 60 Hz (for 120V
version models only) or 230V 50 Hz (for 230V version models only).
15 POWER
Supply the AC mains power to the M17.
When the POWER switch is set to ON position, the M17 goes to
standby mode as shown by the amber status condition of the front
panel Power indicator. Press the front panel o (Standby) button or
HTRM 2 remote control’s [ON] button to switch ON the M17 from
standby mode.
If you intend not to use the M17 for long periods of time (such
as when on vacation), switch o the POWER switch. With POWER
switched o, neither the front panel o (Standby) button nor
HTRM2 remote control’s [ON] button can activate the M17.
IDENTIFICATION OF CONTROLS
REAR PANEL
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M17 AV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M17 AV in the language / languages: English as an attachment in your email.

The manual is 7,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M17 AV

NAD M17 AV Quick start guide - English - 2 pages

NAD M17 AV User Manual - German - 38 pages

NAD M17 AV User Manual - Dutch - 38 pages

NAD M17 AV User Manual - French - 38 pages

NAD M17 AV User Manual - Italian - 38 pages

NAD M17 AV User Manual - Swedish - 38 pages

NAD M17 AV User Manual - Spanish - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info