667813
13
Zoom out
Zoom in
Previous page
1/22
Next page
When a Slot line item is selected, the following menu options will manifest.
Enabled: Source input can be enabled (ON) or disabled (OFF).
VOLUME CONTROL
The M12 VOLUME control function is dependent upon the Volume
Control” menu setting. Volume control can either be set to “Fixed” or
Variable. Select “Save to store selected “Volume Control” and “Fixed Level”
or “Variable settings.
Fixed
If Volume Control” is set to “Fixed”, audio output level is xed and the
M12’s volume control is bypassed.
Set “Fixed Level” to desired preset dB level. Audio output is xed
to the selected level after saving the setting. Audio output level
through ANALOG AUDIO OUTPUT will not change when using the
Volume control or HTRM 2’s [VOL R/T].
At “Fixed Level” setting, the volume control or HTRM 2’s [VOL R/T]
will have no eect and eectively disabled.
Variable
When set to Variable, audio output level through ANALOG AUDIO
OUTPUT is directly adjustable using the volume control or HTRM 2’s
[VOL R/T].
Name: Source input name. Selecting this line item will lead to the menu
keyboard where one can type the preferred name for the current source.
The following additional menu options are included if BALANCED, SINGLE-
ENDED or PHONO input is selected.
Analog Gain: -12dB to 0dB. Gain adjustment allows all sources to play
back at the same volume level so you don’t need to adjust the volume
every time a new source is selected. It is generally preferable to reduce the
level of the loudest source rather than making louder the softer sources.
Sample Rate (48 kHz, 96 kHz, 192 kHz): Select the user’s preference
for sample rate of the Analog-to-Digital Converter. Higher sampling rates
allow for anti-aliasing lters to take eect further outside the audible
frequency range and are generally considered to sound better, especially in
the high frequencies.
PHONO
Aside from above common menu options (Enabled, Name, Volume Control,
Analog Gain and Sample Rate), there is one more option distinct for
PHONO. This is the Phono Mode.
Phono Mode: Select MM (Moving Magnet) or MC (Moving Coil)
depending upon the Phono cartridge type being used. This feature
matches the impedance of the Phono input to the cartridge type.
DIGITAL OUTPUT
SAMPLE RATE 48 KHZ, 96 KHZ, 192 KHZ
Audio inputs may come from various sources with dierent sampling rates.
Select 48 kHz, 96 kHz or 192 kHz to convert all digital audio output content
to single sampling rate.
CONTROL SETUP
AUTO STANDBY
Allows the option of the M12 going to standby mode after 30 minutes of
inactivity or remain at operating mode regardless of any source activities.
ON: M12 will automatically go to standby mode if there are no user
interface interaction and no active source within 30 minutes.
OFF: M12 remains at operating mode even if there is no user interface
interaction and no active source within 30 minutes. This is the default setting.
OPERATION
USING THE M12
13
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M12 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M12

NAD M12 User Manual - German - 22 pages

NAD M12 User Manual - Dutch - 22 pages

NAD M12 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info