667813
11
Zoom out
Zoom in
Previous page
1/22
Next page
DISPLAY MENU OPTIONS
The following display options are accessible via the touch panel display -
Main, Media, Mode, EQ and Setup.
Below are sample screenshots of these options along with descriptions of
applicable functions or features.
MAIN
Coax 1: Current Source.
-20.0 dB: Volume level.
: Go to previous or next Source.
48k: Sample rate.
Mono: Listening mode.
Negative: Polarity setting.
Tone: Tone control settings enabled.
Balance: Balance settings enabled.
Sub Stereo: Subwoofer mode setting.
LPF 200Hz, HPF 200Hz: Subwoofer frequency setting.
MEDIA
“Media” becomes accessible only when the selected Source is “USB Front”
or “USB Back”. If no external USB mass storage device is connected to USB
Front or USB Back input, “Please Insert Device” will be shown in the touch
panel display.
With an external USB mass storage device connected to either USB Front
or USB Back input, MP3, WMA or FLAC les or folders will be shown in the
touch panel display. Select desired le to playback.
If the connected USB mass storage device does not contain any applicable
MP3/WMA/FLAC les, “No les” will be shown in the touch panel display.
Refer also to the items about “USB MODE” and “LISTENING TO USB DEVICE”
at the “OTHER FEATURES” section of the “OPERATION” page.
MODE
The M12 oers distinct listening modes, tailored for dierent types of
recording or program material. The following listening modes can be
selected.
STEREO
Select “Stereo when you wish to listen to a stereo production, such as
music CD or FM broadcast.
Stereo recordings whether in PCM/digital or analog form and whether
surround-encoded or not encoded, are reproduced as recorded.
Multi-channel digital recordings (Dolby Digital and DTS) are reproduced
in “Stereo Downmix” mode via the left and right speakers only.
MONO
Use “Mono” listening mode when the audio source format is mono. The
mono information is replicated on both left and right channels.
“Mono” listening mode is recommended when watching old movies
with mono soundtrack, listening to recorded monaural sound sources
such as AM radio broadcasts or with the foreign language soundtracks
recorded in the left and right channels of some movies.
Mono is also very helpful when setting up a stereo system to check that
both speakers are connected with correct polarity. Correctly connected
speakers will have a solid center image and strong bass response. If one
speaker has the input connections (+ and -) reversed, the image will be
indistinct and the bass will be reduced and uneven sounding.
REVERSED
Sends the right channel to the left speaker and the left channel to the
right speaker. This can easily correct a reversed input connection or
incorrectly recorded music source.
POLARITY
Allow compensation for recordings that have reversed polarity.
Positive: A positive sine wave at the input remains positive at the
output. Polarity is defaulted to “Positive” setting.
Negative: A positive sine wave at the input is negative (inverted) or
reversed at the output.
OPERATION
USING THE M12
11
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M12 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M12

NAD M12 User Manual - German - 22 pages

NAD M12 User Manual - Dutch - 22 pages

NAD M12 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info