493489
7
Zoom out
Zoom in
Previous page
1/14
Next page
1 UNBALANCED
Use a twin RCA-to-RCA lead to connect these sockets to the left and
right analog input of a receiver or amplier.
2 BALANCED
Connect these XLR connectors to the corresponding XLR input of
professional audio ampliers.
Ensure that proper pin congurations are followed – Pin 1: Ground,
Pin 2: Positive (signal live) and Pin 3: Negative (signal return).
3 AES/EBU
Digital audio stream from professional audio sources like SACD/CD
Players or processors can be connected to this XLR connector.
For high-end sources with higher sampling rates like 176kHz and
192kHz, it is highly recommended that such sources be interfaced
with the AES/EBU IN connector. The AES/EBU IN is well suited to
handle such sources with high sampling rate.
4 COAXIAL, OPTICAL
Connect COAXIAL and/or OPTICAL to corresponding S/PDIF output
of sources such as CD, DVD or BD players, digital cable box, digital
tuners and other applicable components.
5 USB
Using Type A to Type B cable connector (not supplied), interface
computer audio to this asynchronous Type B USB input to directly
stream 24/192 content from your PC, MAC or NAS (network-
attached storage).
In order to stream your computer audio via M51, the “NAD USB
Audio driver” that can be downloaded from the NAD website must
be installed. For more information, refer to the NAD USB AUDIO item
in the USING THE M51 – OTHER FEATURES.
Most PCs or MACs can automatically detect M51, with “NAD USB
Audio already available as one of the playback device options in their
respective audio device management settings. Select “NAD USB Audio
as the playback sound or audio setting on your PC or Mac.
IMPORTANT NOTICE
The use of the NAD USB Audio driver downloaded through the NAD site
is done at the customer’s own discretion and risk. The customer will be
solely responsible for any damage to his/her computer system or loss of
data arising out of or in connection with the use of this software driver.
In no event shall NAD be liable for any direct, indirect, incidental, special,
exemplary, or consequential damages including negligence or otherwise
arising in any way out of the use of this software driver.
6 HDMI (HDMI 1,2; HDMI VIDEO OUT)
Connect HDMI 1-2 inputs to the HDMI OUT connectors of source
components such as BD/DVD player or HDTV satellite/cable box.
Connect the HDMI VIDEO OUT to a HDTV or projector with HDMI
input.
NOTE
HDMI 1-2 and HDMI VIDEO OUT function only as direct pass through.
WARNING
Before connecting and disconnecting any HDMI cables, both the M51
and the ancillary source must be powered OFF and unplugged from the
AC outlet. Failure to observe this practice may cause permanent damage
to all equipment connected via HDMI sockets.
7 UPGRADE
M51 may need a software update to be in step with the latest
technology trends. Check with your authorized NAD distributors for
future software updates. Only authorized NAD distributors or service
centers are allowed to implement a software update.
Connect to this input a USB memory stick containing the software
update. Use USB adaptor when necessary.
8 +12V TRIGGER OUT
· The +12V TRIGGER OUT is used for controlling external equipment
that is equipped with a +12V trigger input. This output will be
12V when the M51 is ON and 0V when the unit is either OFF or at
standby mode.
9 RS 232
NAD is a certied partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the M51 via
compatible external controllers.
Refer to the NAD website for information about RS232 Protocol
documents and PC interface program.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD M51
2 CHANNEL AUDIO OUT DIGITAL AUDIO INPUT
UNBALANCED
R BALANCED L BALANCED
L
R
COAXIALAES/EBU OPTICAL USB HDMI 1 HDMI 2
HDMI VIDEO OUT UPGRADE
+12V TRIGGER OUT
RS 232
+12V TRIGGER
IR IN
IN
POWER
ON
100-240V ~ 50/60Hz
4 5 6 7 8 9 10 11 12 131 2 3
ATTENTION!
Please make sure that the M51 is powered o or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
14
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M 51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M 51 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M 51

NAD M 51 Quick start guide - English - 2 pages

NAD M 51 User Manual - German - 14 pages

NAD M 51 User Manual - Dutch - 14 pages

NAD M 51 User Manual - French - 14 pages

NAD M 51 User Manual - Italian - 14 pages

NAD M 51 User Manual - Swedish - 14 pages

NAD M 51 User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info