19
ENG
SYSTEM AND OPERATIONS SET UP
MACRO AND PUNCH THROUGH PROGRAMMING
The MACRO and PUNCH THROUGH can be also programmed in this mode. Press the button
you wish to program and follow procedures shown below:
MACRO PROGRAMMING
There are three type of macro functions you can program. They are as follows:
1 M1, M2 and M3 in the Main menu. Designed to send out up to twenty eight
commands from each of the three buttons.
2Twelve device buttons in the Main menu. Send out up to fourteen commands from
each device button.
3 Favorite Channel Buttons. You can create and design up to 60 buttons as your
Favorite Button in video modes. Each favorite channel button can send out up to
fourteen commands with one button press.
TO PROGRAM MACRO FUNCTIONS:
Press MACRO PROGRAM button in 2. SYSTEM & OPTIONS
FOR M1 – M3 BUTTON:
1 Press one of the three macro buttons, M1 – M3, for which you want to store the macro.
2 Select functional buttons you wish to store in the macro button. You can store up to
28 commands.
3 Store the commands you selected to the macro button by pressing CH (UP) button. To
cancel the macro commands, press CH (DOWN).
