12
ENG
PROGRAMMING THE REMOTE CONTROL
8 Confirm that you entered the right code number that matches your component by
pressing other buttons such as POWER, VOLUME, MUTE and CHANNEL. If any of the
buttons do not operate as they should, please repeat from Step 5.
9 Continue to program other components by repeating from the above step 5.
10
Once you have completed programming all the devices, exit from the programming
mode by pressing both the MAIN and PAGE buttons simultaneously.
11
You will now be in the setting mode once again. Move the cursor to 8. TO EXIT and
press the joystick down or simply press the MAIN button to exit to main menu.
AUTO SCAN WITH BRAND NAMES
1 Manually turn on the component you plan to operate.
2 Go to program setting mode in the remote control by pressing both the MAIN and
PAGE buttons simultaneously for five seconds.
3 Using the joystick, move the cursor down in the LCD screen to 3. PREPROGRAM.
4 Push the joystick down to enter the preprogram mode.
5 Select the device you wish to program in the LCD screen, (e.g. To program DVD, press
the DVD device button).
6 Select the device from which the three digit code number will be selected, (e.g. If it is
from the DVD code table, press the DVD device button).
