161044
9
Zoom out
Zoom in
Previous page
1/68
Next page
9
ENGLISHFRANÇAISDEUTSCHNEDERLANDSESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
SETUP FOR CUSTOM AND MULTI-ZONE INSTALLATIONS
REMOTE CONTROL CODES
The NAD C 425 has a remote control command receiver built in so it will
respond to NAD remote control commands, such as from most NAD
system remote controls. This will allow access to basic functions such as
preset up/down.
Particularly with Custom Install in mind, the NAD C 425 will respond to
other commands not usually found on NAD remote control handsets.
The table below indicates most commands the C 425 recognises.
The NAD C 425 uses the NEC format for IR transmission; customer code
is 877C, the corresponding hex codes are next to the IR command:
Function HexCode
Preset D2
Preset D1
Tune D4
Tune D3
Preset 1 8A
Preset 2 8E
Preset 3 92
Preset 4 96
Preset 5 8B
Preset 6 8F
Preset 7 93
Preset 8 97
Preset 9 98
Preset 0 C7
Power On F0
Standby F1
FM Mute/Mode 37
Blend 35
Sleep F3
Dimmer F2
Display 26
AM 82
FM 81
12V TRIGGER INPUT
NAD components equipped with 12V output triggers are fully
compatible with the C 425’s 12V input trigger.
Plug type: 3.5mm mono mini-jack
Operating range: 6 to 15 V DC
Current drawn: <10mA
Centre pin = +
Shaft =
SYSTEM INTEGRATION (RS-232)
The C425’s RS-232 port offers extensive integration to sophisticated
media-system and home-automation control, and permits full control of
all of the C425's features. Using this port, the C425 can be connected
to any other device with an RS-232 port, such as a personal computer or
a home automation system. Any command or function that can be
issued from the front panel or the TNR 1 remote controller can be
performed via the RS-232 port, and information feedback of the C425’s
current settings.
TECHNICAL DETAILS
The RS-232 port uses the following standard pin-out arrangement:
NOTES:
Use a standard DB-9 male to DB-9 female RS-232 serial cable
between your Windows®PC and the C425.
Do not use a null-modem type of RS-232 cable.
Some Windows® PC's may not have RS-232 serial connector. In this
event, use a standard "off-the-shelf" RS-232 to USB adaptor to
connect to your Windows® PC. Follow the instructions that come
with the RS-232 to USB adaptor for setting up the adaptor. Your
custom installer or dealer can assist you in the proper setup and
configuration of the RS-232 interface.
Neither a DB-9 RS-232 serial cable nor a RS-232 to USB adaptor is
supplied with the C425.
Please log onto www.nadelectronics.com for the latest C425
interface control software.
Operation
DB-9 Pin # Function
2 Transmit Data
3 Receive Data
5 Signal Ground
DB-9 pin-out Assignment
C425 072006.qxd 7/28/2006 11:31 AM Page 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD c425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD c425 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info