493509
16
Zoom out
Zoom in
Previous page
1/24
Next page
ABOUT DAB RADIO 230V VERSION ONLY
Until now, analogue radio signals such as FM or AM have been subject to
numerous kinds of interference on their way from the transmitter to your
radio. These problems were caused by mountains, high-rise buildings
and weather conditions. With Digital Audio Broadcast (DAB), you can now
receive CD-like quality radio programs without any annoying interference
and signal distortion. DAB broadcasts use digital signals rather than
traditional analogue transmissions, thus providing clear high quality
reception. You get far more robust reception and virtually hiss or crackle
free sound with DAB as long as you are within a good coverage area.
With DAB, the listener can scroll through a list of available stations - then
instantly tune to the station of his choice. There is no need either to
remember channel frequencies. All broadcasts are selected by simply
selecting the service name.
The C 725BEE makes it possible for you to enjoy listening to DAB broadcasts.
The C 725BEE has a Digital Audio Broadcast (DAB) module socket on the
rear panel for adding a separately sold and NAD-specied outboard DAB
module – the NAD DAB Adaptor DB 1. All the control software for this
format is included; just plug-in the module and start enjoying the CD-like
quality sound and expansive content selection available with DAB.
CONNECTING THE DAB MODULE
Plug-in the other end of the DIN connector (supplied with your NAD DAB
Adaptor DB 1) from the DAB module’s output port into the corresponding
DAB module input socket on the rear panel of the C 725BEE. Select DAB
mode on the C 725BEE by toggling the [TUNER] button in the front panel
or SR 8’s [TUN] button.
NOTES
Please refer to NAD DAB Adaptor DB 1 installation guide for proper setup
connection of the DB1 with respect to the C 725BEE.
If there is no NAD DAB Adaptor DB 1 connected, the VFD will show
“Check DAB Tuner.
DAB OPERATION
With the separately sold NAD DAB Adaptor DB1 already connected to the
C 725BEE, you can now carry out the C 725BEE to receive DAB broadcasts.
1 Toggle [TUNER] button until DAB mode. The VFD will show “No Service
List” indicating that there are no scanned DAB broadcast services yet.
This is the default mode of the DB1.
2 To tune to DAB broadcast services, press [TUNER MODE] and then toggle
the front panel’s [TUNE ] to select either “Full Scan or “Local Scan.
FULL SCAN will enable the scanning of the full range of digital
frequencies (Band III and L-Band).
LOCAL SCAN performs local scanning of available DAB services in your
area. Check with your dealer or visit www.WorldDAB.org to check the
applicable digital transmission frequencies in your area.
3 Upon selecting either “Full Scan or “Local Scan, press SR 8’s [ENTER] button.
Automatic scanning will ensue. This sequence cannot be interrupted.
During the sequence, the following message will be visible in the VFD.
The bars show the progress of the sequence. When scanning is
completed, the last number shown on the right side of the VFD
corresponds to the total number of DAB broadcast stations found. Then,
the rst station is tuned in (See ALPHANUMERIC” section below to
understand the order or arrangement of stations).
4 Press and hold SR 8’s [ENTER] button - the signal strength of the
currently tuned broadcast will be shown on the VFD. The more
segments visible in the lower display line, the stronger the signal. By
changing the position of the antenna, you can increase the signal
strength. You can also opt for an external antenna. Consult an antenna
professional for more information. Press SR 8’s [ENTER] button to exit
Signal Strength check.
NOTES
“No Service List” will also be shown in the VFD when no stations are
found after the scanning process. If this occurs, check the connection
and position of the DAB antenna or call your local DAB broadcast
providers for coverage information.
SR 8’s [TUNER MODE] and [ ] are the equivalent remote control
keys for the front panel buttons [TUNER MODE] and [TUNE ].
When using these SR 8 buttons to navigate DAB options, ensure that the
“DEVICE SELECTOR” setting of your SR 8 is set to “TUN”.
Front panel’s [TUNER MODE] button also functions like SR 8’s [ENTER]
button. However, it is solely SR 8’s [ENTER] button that can check a DAB
stations signal strength (item 4 above) or directly select a DAB station
after releasing [TUNE ] button (item 2 under “SERVICE LIST”); front
panel’s [TUNER MODE] button cannot execute these said functions.
SERVICE LIST
Follow the steps below to select through the DAB service stations found.
1 At DAB mode, press [TUNE ] to step through the list of available
stations as shown in the lower display line of the VFD.
2 Release [TUNE ] when you arrive at your desired DAB station and
the C 725BEE will tune to it. You can also press SR 8’s [ENTER] button
after releasing [TUNE ] for faster station selection.
DAB TUNER MODE
Aside from “Full Scan and “Local Scan as already described above, pressing
the [TUNER MODE] button will also present you with other options namely
– Station Order, DRC, Manual Scan, Prune List and Reset
OPERATION
LISTENING TO DAB RADIO
16
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 725 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 725 BEE in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 725 BEE

NAD C 725 BEE User Manual - German - 24 pages

NAD C 725 BEE User Manual - Dutch - 24 pages

NAD C 725 BEE User Manual - French - 24 pages

NAD C 725 BEE User Manual - Swedish - 24 pages

NAD C 725 BEE User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info