493509
14
Zoom out
Zoom in
Previous page
1/24
Next page
The C 725BEE’s internal AM/FM tuner oers very high quality sound
from radio broadcasts. The reception and sound quality will always be
dependent to a degree however on the type of antenna(s) used as well as
proximity to the broadcast origin, geography and weather conditions.
ABOUT ANTENNAS
The supplied ribbon-wire FM antenna can be connected to the rear-panel
FM-antenna input using the included “balun” adapter and should be fully
extended to form a T. This folded-dipole antenna will usually work best
when oriented vertically, with the arms of its T fully outstretched and
arranged perpendicular to the origin of the desired broadcast. There are
no “rules however, and experimenting freely with antenna placement and
orientation may yield the clearest sound and lowest background noise.
In areas of poor FM reception, an exterior FM antenna can improve
performance dramatically. If radio listening is important to you, consider
consulting an antenna installation professional to optimize your system.
The supplied AM loop antenna will usually provide adequate reception.
However, an exterior AM antenna can be used to improve reception.
Consult an antenna professional for more information.
ASSEMBLING THE LOOP ANTENNA
1 Rotate the outer frame of the antenna.
2 Insert the bottom edge of the outer frame into the groove on the stand.
3 Extend the antenna cord.
SELECTING BAND
Press the [TUNER] button on the front panel or on the remote control. Each
subsequent press of either key will toggle the unit among AM, FM and
DAB radio.
IMPORTANT NOTICE
In the foregoing sections about TUNER features, make sure to
set SR 8’s DEVICE SELECTOR to “TUN” for the applicable TUNER
commands to be eected.
TUNING STATIONS
1 Toggle [TUNE ] on the front panel or remote control to step up or
down between AM or FM frequencies.
2 Press and release [TUNE ] to search up or down - the C 725BEE’s
tuner will stop at the next suciently strong signal it encounters.
Pressing the [TUNE ] during the search process will stop the
search.
DIRECT TUNING
If you know your desired station’s frequency allocation, you can tune
directly to the station.
1 Toggle [ENTER] button to switch between “Preset” and Tune mode (see
the lower line of the VFD). Select Tune” mode.
2 Using the numeric keys of the remote control, key-in the frequency
allocation of the station and then press [ENTER]. For example, to enter
104.50 MHz, press “1”, “0”, “4”, “5” and “0” or press “1”, “0”, “4”, “5” and [ENTER].
SETTING RADIO PRESETS AM/FM/DAB
The C 725BEE can store a mix of your 40 favorite AM, FM and DAB
broadcasts for immediate recall.
1 To store a radio preset, rst tune the desired frequency (see above), then
press the front panel [MEMORY] button. The VFD will show a blinking
“MEMORY” icon and the next available vacant Preset number – for
example, “Preset _ _Free” (the two blank spaces will correspond to the
preset number that could be from ‘01’ to the maximum of ‘40’).
2 Press [MEMORY] button again to store the desired frequency on the
Preset number shown or use the [PRESET ] keys to select another
available Preset number.
3 Then, press [MEMORY] key button again. Your desired frequency is now
stored in the assigned preset.
The Radio Presets can be stored using the same keys on the front panel or
remote control.
RECALLING PRESETS
1 Use the [PRESET ] keys on the front panel to step up or down
between presets.
2 Press and hold [PRESET ] to “scroll” continuously up or down.
3 Stop or release the [PRESET ] key while scrolling to select a desired
Preset number – the stored station will be recalled after a brief delay;
or press [ENTER] to tune immediately to the selected Preset number.
Empty presets will be skipped during preset tuning.
The SR 8 remotes [PRESET ] keys work similarly.
DIRECT RECALL OF A PRESET
You can directly recall a desired Preset number.
1 Toggle SR 8 remote’s [ENTER] button to switch between “Preset” and
Tune” mode (see the lower line of the VFD). Select “Preset” mode.
2 Using the numeric keys of the remote control, key-in directly your
desired Preset number and then, press [ENTER]. For example, to enter
Preset 5, press “5” and then, press [ENTER].
DELETE A PRESET
You can empty a preset by deleting the stored information.
1 Select the Preset number to be deleted.
2 Press and hold [INFO] button and then press [MEMORY] button
– current stored preset setting will be erased.
OPERATION
LISTENING TO AM/FM RADIO
14
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 725 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 725 BEE in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 725 BEE

NAD C 725 BEE User Manual - German - 24 pages

NAD C 725 BEE User Manual - Dutch - 24 pages

NAD C 725 BEE User Manual - French - 24 pages

NAD C 725 BEE User Manual - Swedish - 24 pages

NAD C 725 BEE User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info