493509
9
Zoom out
Zoom in
Previous page
1/24
Next page
1 +12V TRIGGER OUT: The +12V TRIGGER OUT is used for controlling
external equipment that is equipped with a +12V trigger input. This output
will be 12V when the C 725BEE is ON and 0V when the unit is either OFF or
in standby. This output can drive a load up to 150mA at 12V.
2 IR IN/OUT: These mini-jacks accept and output remote-controlled
codes in electrical format, using industry-standard protocols, for use
with “IR-repeater” and multi-room systems and related technologies.
IR IN: This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the C 725BEE from a remote location.
IR OUT: When connected to the IR IN of an ancillary equipment, direct
the ancillary equipments own remote control to the C 725BEE’s infrared
receiver to command or control the linked unit.
All NAD products with IR IN/IR OUT features are fully compatible with
the C 725BEE. For non-NAD models, please check with your other
product’s service specialists as to their compatibility to the C 725BEE’s
IR features.
3 MP INPUT: Input for a Media Player or other line-level signal source.
Use a twin RCA-to-RCA lead to connect the Media Player’s left and right
Audio Outputs” to this input. The MP input is also the assigned port
where the optional NAD IPD 1’s AUDIO OUT could be connected.
With the NAD IPD 1’s DATA PORT connected to the corresponding rear
panel’s DATA PORT socket, your iPod player docked in the NAD IPD
1 and the C 725BEE set to “MP mode, you can start listening to your
iPod’s playlist. Refer also to LISTENING TO YOUR iPod PLAYER under the
OPERATION main heading.
4 CD INPUT: Input for a CD or other line-level signal source. Use a
twin RCA-to-RCA lead to connect the CD player’s left and right Audio
Outputs” to this input.
5 DISC INPUT: Input for additional line level input signals such as CD,
Mini Disc player or the output signal from a step-up amplier for a
turntable. Use a twin RCA-to-RCA lead to connect the auxiliary units left
and right Audio Outputs” to this input.
6 AUX INPUT: Input for additional line level input signals such as
another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary
unit’s left and right Audio Outputs’ to this input.
7 TAPE: Connections for audio tape recorder playback of any type. Using
twin RCA-to-RCA leads, connect to the left and right Audio Output of
the tape machine to the TAPE sockets for playback.
8 REC OUT/ZONE 2: Doubles as both a RECORD and ZONE output port.
As a RECORD output, the Source signal directed to this output could
be used for making audio recordings. As a Zone output, it sends zone
selected audio sources to the corresponding audio input of another
separate zone. Use high quality patch cables to reduce noise pickup
over long distance runs.
9 PRE OUT: Connections to an external power amplier or processor,
such as a surround-sound decoder. In normal use, this should be
connected to the Main In sockets (No. 10) with the links supplied. To
connect your NAD C 725BEE to external processor or amplier sections,
remove rst these links. Use a twin RCA-to-RCA lead to connect the left
and right Audio Input of a power amplier or processor to the PRE OUT
sockets.
NOTE
Always turn the C 725BEE and associated external power ampliers OFF
before connecting or disconnecting anything to the PRE OUT and MAIN
IN sockets. The PRE OUT output signal will be aected by the C 725BEE’s
volume and tone control settings.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the C 725BEE is powered o or unplugged before making any connections. It is also advisable to power-down or unplug all
associated components while making or breaking any signal or AC power connections.
16
1 432 5 6 7 8 9 10 11 12 13 14
17 18 19 20 21
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 725 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 725 BEE in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 725 BEE

NAD C 725 BEE User Manual - German - 24 pages

NAD C 725 BEE User Manual - Dutch - 24 pages

NAD C 725 BEE User Manual - French - 24 pages

NAD C 725 BEE User Manual - Swedish - 24 pages

NAD C 725 BEE User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info