GB - 15GB - 13GB - 12
GB - 10GB - 9GB - 8 GB - 11
GB - 14
Alternative frequency (AF)
The AF function switches to a different frequency on the same network in order to
maintain optimum reception. In FM mode, repeatedly press SEL/VOL button (5)
until “AF” appears in the display, rotate SEL/VOL knob (5) to turn “ON” the function
,certain program will be automatically searched and received. If the reception of
the current broadcast station deteriorates, “AF” icon appears in the display and
the radio searches for the same program on another frequency. Repeatedly press
SEL/VOL button (5) until “AF” appears in the display, rotate SEL/VOL knob (5) to
turn “OFF” the function.
When reception is bad, the “AF” icon will blink.
Trafc alarm (TA)
In the TA standby mode, when a trafc announcement broadcast starts, the trafc
announcement broadcast is received as top priority regardless of the function mode
so you can listen to it. Trafc program (TP) automatic tuning is also possible.
Repeatedly press SEL/VOL button (5) until “TA” appears in the display, rotate
SEL/VOL knob (5) to turn “ON” the function , when LCD shows “TA” icon, trafc
program will be automatically searched and saved, when LCD shows “TP” icon,
this means that the RDS broadcast station being received has trafc announcement
programs.
If you select TA fuction while a trafc announcement broadcast is being received,
the trafc announcement broadcast reception is cancelled and the unit goes into
the TA standby mode.
If a TP station is not received, the unit continues searching.
Repeatedly press SEL/VOL button (5) until “TA” appears in the display, rotate
SEL/VOL knob (5) to turn “OFF” the function , “TA” icon goes off.
ALARM
“ALARM” will be displayed when an emergency broadcasting is received;
meanwhile sound output level will be adjusted to the preset output level
automatically when the volume control is set at minimum.
Program type selection (PTY)
Long press PTY button (2) to select “PTY” function .When PTY is selected,
the radio starts to search corresponding PTY information, and stops when the
corresponding PTY information is detected.
If corresponding PTY information does not exist any more, PTY is automatically
stopped to normal mode.
LISTENING TO USB DEVICE OR SD/SDHC/MMC CARD
To insert a USB device (not included)
Connect your USB device to the USB port (9), the set will switch to “USB” mode
automatically. If USB has already been inserted, press MODE button (1) to switch
to USB mode.
To insert a SD, SDHC or MMC card (not included)
Insert your SD, SDHC or MMC card in the card slot (17), the set will switch to
“SD-MMC” mode automatically. If a card has already been inserted, press MODE
button (1) to switch to card mode.
Basic player functions
Play/Pause: press (16) to suspend momentarily the track playback. Press (16)
again to resume playback.
Skip/Fast search: press button (12) to skip forward to next track and (4)
to skip backward to previous track.
Random playback: Press RDM button (16), all tracks will be played randomly.
Press it again to cancel this function.
Select A Directory: press and hold DIR+ button (12) or DIR- button (4) to select
directory upward or downward. If the MP3 contents does not have any directory,
DIR + (12) and DIR- (4) buttons are inactive.
Searching a track in MP3-USB/SD
1. Press AS/PS button (15) once,
2. Use the numeric keys to enter the track number,
3. Press SEL/VOL knob (5) to start playing.
Exit USB/SD card mode
To exit USB or card mode, disconnect your USB device or your card from the
unit, the set will switch to tuner mode automatically.
Note
* There are many USB devices or SD/SDHC/MMC card in the market. We cannot
guarantee to support all different models. Please try another USB device or SD/
SDHC/MMC card if yours is not supported.
* The unit might not support all the multimedia les stored in SD/SDHC/MMC
card or USB because it includes some special playback procedure which might
not be compatible with the procedure of this unit.
LISTENING TO AUXILIARY SOURCE
1. Connect your auxiliary source (e.g. MP3 player) to the AUX IN jack (8)
2. Press and hold (5) button to turn the unit on.
3. Press MODE (1) to select AUX mode.
4. Start playback from your auxiliary source.
5. Adjust the volume (5) to desired level.
6. To stop, disconnect your auxiliary source from the Aux in jack (8), press MODE
button (1) to select other source.
MAINTENANCE
Precaution
- Clean the front panel with a soft cloth, or damp chamois leather. Never use
solvents.
• Do not expose to rain or water;
• Do not drop or apply shock.
- Make sure that you keep your set away from water and high temperatures.
- The use of apparatus in moderate climates.
- Do not be exposed to dripping or splashing, and that no object lled with liquids,
such as vases, shall be placed on the apparatus.
- No naked flame sources such as lighted candles should be placed on the
apparatus.
Replacing the Fuse
Make sure the amperage matches the specied value when replacing the fuses.
If the fuse is blown, check the power connection and replace with a new one. If
the same problem occurs, it could be caused by an internal malfunction. In such
cases, please consult the nearest service dealer.
TROUBLE SHOOTING GUIDE SPECIFICATIONS
General
Power Requirement
Load Impedance
Max. Power Output
Tone Controls
Dimensions
Weight
FM radio
Tuning Range
IF Range
Usable Sensitivity (-30dB)
Signal-to-noise Ratio
Stereo Separation
USB/SD MP3 player
Signal-to-noise Ratio
Separation
Distortion
Frequency Response
12V DC (11-16V allowable)
4 Ω
20W x4
±10 dB
Bass at 100 Hz
Treble at 10 kHz
Approx. 178 x 97 x50 mm (d/w/h)
Approx. 0.7 kg
87.5-108 (MHz)
10.7 MHz
15 dBuV
50 dB
25 dB
60 dB
40 dB
<=1%
40-20000Hz
Note:
Due to continuous product improvement, specications and design are subject to
change without prior notice.
CAUTION! The unit conforms to the international safety specifications and to
guide lines of the European community and also complies with current standards
concerning electrical safety and electromagnetic compatibility EMC.
SYMPTOM
No power.
No sound.
The operation
keys do not work.
The radio does
not work. The
automatic radio
station selection
does not work.
The built-in microcomputer
is not operating properly.
The antenna cable is not
connected.
Insert the antenna cable firmly.
Select a station manually.The signals are too weak.
Press the RESET button.
Front panel is not properly fixed
into its place.
The car ignition switch
is not on.
The fuse is blown.
Volume is in minimum.
Wiring is not properly
connected.
Adjust volume to a desired level.
Check wiring connection.
Replace the fuse.
If the power supply is connected to
the car accessory circuits, but the
engine is not moving, switch the
ignition key to “ACC”.
CAUSE SOLUTION
WARNINGS
ATTENTION: To reduce the risk of electric shock, do not
remove the cover. There are no user serviceable parts inside
the unit. Refer all servicing to qualied personnel.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the
user of important instructions accompanying the product.
WARNING - To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
If at any time in the future you should need to dispose of this product
please note that Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice. (Waste Electrical
and Electronic Equipment Directive)
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
Using 1-6 numeric button to Select Program
1) Long press PTY button (2) once. When “PTY” appears on display, press
number button 1-6 repeatedly to select below programs:
Button 1: NEWS/ AFFAIRS / INFO
Button 2: SPORT / EDUCATE / DRAMA
Button 3: CULTURE / SCIENCE / VARIED
Button 4: WEATHER / FINANCE / CHILDREN
Button 5: SOCIAL / RELIGION / PHONE IN
Button 6: TRAVEL / LEISURE / DOCUMENT
2) Long press PTY button (2) twice, press number button 1-6 repeatedly to select
below programs:
Button 1: POP M / ROCK M
Button 2: EASY M / LIGHT M
Button 3: CLASSICS / OTHER M
Button 4: JAZZ / COUNTRY
Button 5: NATION M / OLDIES
Button 6: FOLK M
Then the unit will start searching for the corresponding program automatically.
Long press PTY button (2) for the third time to exit the PTY mode.
LOC ON/OFF
Repeatedly press SEL/VOL knob (5) to select “LOC” mode. When ON, the strong
signal local stations can be received, when OFF, the week signal out-of-town
stations may be received.
EON (Enhances Other Network Information)
Repeatedly press SEL/VOL knob (5) until “EON” appears in the display, rotate
SEL/VOL knob (5) to switch between “EON ON” and “EON OFF” mode. When
receive the EON information, the EON indication is on. With EON facility, it offers
the ability for local stations to “break into” a national station’s broadcast for the
duration of a Trafc Announcement.
Region ON / OFF (REG)
Repeatedly press SEL/VOL button (5) until “REG” appears in the display, rotate
SEL/VOL knob (5) to switch between “REG ON” and “REG OFF” mode.
REG ON: should be selected to listen to the REGIONAL broadcast of the current
station, even if there is a national broadcast of this station.
REG OFF: should be selected to listen to the national broadcast of this station.
LISTENING TO THE RADIO
Band selection
In tuner mode, repeatedly press BAND button (2) to select bands: FM1-> FM2 ->
FM3.
Station search
- Manual Tuning
Press and hold button or (4/12) until “MANUAL” shows on display, then
press button or (4/12) continuously to select a station downward or
upward. Press and hold button or (4/12) to tune to a station with a faster
speed.
Note: The unit will return to the “AUTO” scanning mode if no adjusting happens
within 5 seconds.
- Automatic Tuning
Press or (4/12) once, the radio automatically searches a station downward
or upward respectively and plays when it nds a station. Press or (4/12)
again to stop scanning.
Scanning and memorizing stations
Automatic memory storing
In tuner mode, press and hold AS/PS (15) button for 3 seconds to start automatic
scanning and station store on numeric buttons 1-6.
- Preset scan
Press AS/PS (15) button shortly to start preset stations scan. All preset stations
are scrolled during few seconds. To remain on a station, press again the AS/PS
(15) button.
- Preset buttons 1- 6 (3/13/14/6/11/10)
1. Tune to a station with or (4/12).
2. Press and hold one of the 1- 6 preset buttons for 2 seconds until LCD shows the
corresponding number, which indicates that station is stored on this number.
3. In radio mode, press 1- 6 preset buttons to listen to stored stations.
Note: The unit can be stored up to 6 stations for each band.
-- RDS (Radio Data System) Operations --
This unit has a built-in RDS decoder system that supports broadcast stations
transmitting RDS data. This system can display the name of the broadcast station
being received and can automatically switch to the broadcast station with the best
reception as you travel on long distances (AF switching). A trafc announcement
broadcast from a RDS station, no matter what mode you are. Additionally, if EON
information is received, enables automatic switching of other preset stations on the
same network and interruption of the station being received with trafc information.
This function is not available in some areas.
