561566
29
Zoom out
Zoom in
Previous page
1/40
Next page
29
Klaus Michler
Parts list for the Twin Star II
Part No. Description Material Dimensions
No. off
1 1 Building instructions Paper, 80 g / m² A4
2 1 Decal set Printed adhesive film 330 x 700 mm
3 1 L.H. fuselage shell Moulded Elapor foam Ready made
4 1 R.H. fuselage shell Moulded Elapor foam Ready made
5 1 Canopy Moulded Elapor foam Ready made
6 1 L.H. wing panel Moulded Elapor foam Ready made
7 1 R.H. wing panel Moulded Elapor foam Ready made
8 1 L.H. spar cover Moulded Elapor foam Ready made
9 1 R.H. spar cover Moulded Elapor foam Ready made
10 1 Tailplane Moulded Elapor foam Ready made
11 1 Fin Moulded Elapor foam Ready made
Small items set
20 3 Hook-and-loop tape, hook Plastic 25 x 60 mm
21 4 Hook-and-loop tape, loop Plastic 25 x 60 mm
22 2 Canopy-Lock latch Inj. moulded plastic Ready made
23 2 Canopy-Lock latch tongue Inj. moulded plastic Ready made
24 4 Glue-fitting horn Inj. moulded plastic Ready made
25 4 Pushrod connector Metal Ready made, 6 mm Ø
26 4 Washer Metal M2
27 4 Nut Metal M2
28 4 Socket-head grubscrew Metal M3 x 3 mm
29 1 Allen key Metal 1.5 mm A/F
30 2 Pre-formed aileron pushrod Metal 1 Ø x 70 mm
31 2 Wing retainer Inj. moulded plastic Ready made
32 2 Screw Plastic M5 x 50 mm
33 2 Wing retainer screw plate, A Inj. moulded plastic Ready made, M5
34 2 Wing retainer screw plate, B Inj. moulded plastic Ready made, M5
Wire and rod set
40 1 Wing joiner tube GRP tube 10 Ø x 620 mm
41 1 Steel elevator pushrod, pre-formed end Metal 0.8 Ø x 770 mm
42 1 Steel rudder pushrod, pre-formed end Metal 0.8 Ø x 720 mm
43 1 Elevator snake outer sleeve Plastic 3 / 2 Ø x 700 mm
44 1 Rudder snake outer sleeve Plastic 3 / 2 Ø x 700 mm
45 1 Elevator snake inner sleeve Plastic 2 / 1 Ø x 730 mm
46 1 Rudder snake inner sleeve Plastic 2 / 1 Ø x 730 mm
47 1 Aerial sleeve Plastic 3 / 2 Ø x 700 mm
Power system set
60-63 2 Permax 400 motor mount (1 off) Plastic Ready made
50 2 Motor Permax 400 6V Ready made
52 2 Propeller Plastic 125 x 110 mm
53 2 Motor power leads and plug 370 mm, 0.75 mm²
54 1 Wiring board and cables Ready made
55 1 Cable tie Plastic 98 x 2.5 mm
Permax 400 motor mount (1 off), 2-part incl. screws
60 1 Motor bulkhead Inj. moulded plastic Ready made
61 1 Motor bracket Inj. moulded plastic Ready made
62 2 Screw Metal M2.5 x 4 mm
63 4 Screw Metal 2.2 x 13 mm
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Twin Star II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Twin Star II in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info